Use Of The Appliance - Electrolux ESI 66065 User Manual

20 electrolux
1)
Rinse aid
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing
programme operates.
Programme buttons
Press one of these buttons to set a wash-
ing programme. The related indicator
comes on. Refer to 'Washing programmes'.
Delay start button
Use this button to delay the start of the wash-
ing programme with an interval between 1
and 24 hours. Refer to 'Select and start a
washing programme'.
Display
The display shows:
• The electronic adjustment of the level of
the water softener.
• Activation/deactivation of the rinse aid dis-
penser (only with multitab function on).
• The washing programme duration.
• Remaining time to the end of the washing
programme.
• The end of a washing programme. The
display shows a zero.
• Remaining time to the end of the delay
start.
• Fault codes.
Function buttons
Use the function buttons for these opera-
tions:
• To adjust electronically the level of the wa-
ter softener. Refer to 'Setting the water
softener'.
• To activate/deactivate the multitab func-
tion. Refer to 'Multitab function'.
• To activate/deactivate the rinse aid dis-
penser when the multitab function is on.
Refer to 'What to do if...'.

USE OF THE APPLIANCE

1. Be sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water soft-
ener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appli-
ance.
Indicator lights
It comes on when it is necessary to fill the rinse aid container. Refer to
'Use of detergent and rinse aid'.
• To cancel the washing programme in pro-
gress or a delay start in progress. Refer
to 'Select and start a washing pro-
gramme'.
Setting mode
The appliance must be in setting mode
for these operations:
• To select and start a washing pro-
gramme and/or a delay start.
• To adjust electronically the level of the wa-
ter softener.
• To activate/deactivate the multitab func-
tion.
• To activate/deactivate the rinse aid dis-
penser.
Press the on/off button. The appliance
is in setting mode when:
– All the programme indicator lights come
on.
Press the on/off button. The appliance
is not in setting mode when:
– Only one programme indicator light
comes on.
– The display shows the duration of a wash-
ing programme or a delay start.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Select
and start a washing programme'.
5. Set the correct washing programme for
the type of load and soil.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing programme.
If you use the combi detergent tablets
('3 in 1', '4 in 1', '5 in 1'), use the multi-
tab function (refer to 'Multitab function').