Outside Cabinet Requirements; Ground Placement Installation; Side Mount Installation - Weber SPIRIT EPX-325S PREMIUM GBS Owner's Manual

Outside Cabinet Requirements

If the cylinder you have does not meet the size
requirements for placement inside the cabinet, the
cylinder must be placed outside the cabinet, on the
right; either on the ground or secured to the outside of
the cabinet with a cylinder strap (a feature on some of
our barbecues). The maximum size requirements for
cylinders installed outside the cabinet are:
Cylinder Capacity: 13 kg maximum
Cylinder Height: 587 mm maximum
Cylinder Width: 306 mm maximum

Ground Placement Installation

1) Open cabinet door.
2) Pass the regulator hose (A) out through the side
panel opening.
3) Place the cylinder on the ground, outside the
cabinet, on the right side of the barbecue.
4) Turn the LPG cylinder so the opening of the valve is
facing forward.
5) Connect the regulator to the LPG cylinder. Refer to
"CONNECTING THE REGULATOR."

Side Mount Installation

You will need: cylinder strap.
1) Open cabinet door.
2) Pass the regulator hose out through the side panel
opening.
3) Thread cylinder strap through the two holes on the
side panel. Choose lower or upper cylinder strap
holes depending upon the height of your cylinder.
4) Place the LPG cylinder on the cylinder rest (B). The
cylinder valve opening should be facing forward.
5) Adjust the length of the strap to the cylinder,
and snap cylinder strap buckle together (C). LPG
cylinder should fit snug against the side panel.
6) Connect the regulator to the LPG cylinder. Refer to
"CONNECTING THE REGULATOR."
7) Replace the cylinder screen. Refer to "ASSEMBLY
GUIDE."
9