Weber SPIRIT EPX-325S PREMIUM GBS Owner's Manual page 15

Setting a Barbecue Temperature
Notification
Please follow these steps for setting a notification to
alert you when your barbecue has reached a target
internal temperature:
1) Push any button located on the temperature
controller to turn ON the WEBER CONNECT module.
2) Push the BELL button to activate barbecue
temperature notification.
3) While the display is blinking, push the + or - buttons
to set the target barbecue temperature. Push the
CHECKMARK button to confirm your selection.
4) Repeat steps 2 and 3 to update or set a new target
temperature.
5) Once the barbecue reaches the target temperature,
the BELL button will blink, the controller will ding,
and if using the WEBER CONNECT app, you will
receive a push notification on your smart device.
6) All of these WEBER CONNECT module functions can
also be set wirelessly via Wi-fi or Bluetooth® from
the WEBER CONNECT app on your smart device.
Barbecuing with Food Temperature Probes
Use the included food temperature probe to monitor
your WEBER barbecue for the perfect food, every time.
Please follow these steps for using food temperature
probes:
1) Once the barbecue has been preheated, open the
barbecue lid and clean the cooking grates using
a barbecue brush or scraper, then set the control
knobs to the desired barbecue temperature.
2) Place your food on the grates.
3) Plug the food temperature probe(s) into the ports
of the WEBER CONNECT module (F) and, using
heat resistant barbecue mitts or gloves, route food
temperature probe cables through the side channel
on the barbecue (G).
4) Insert food probe(s) into the centre of the thickest
part of your food.
5) Close the barbecue lid.
6) Push any button located on the temperature
controller to turn ON the WEBER CONNECT module.
7) Push the BELL button to navigate between
barbecue temperature and food temperature
probes 1 and 2.
8) Once you select which probe you are using,
push the + or - buttons to set the target food
temperature. Push the CHECKMARK button to
confirm your selection.
9) Repeat steps 7 and 8 to update or set a new target
temperature.
10) Once the probe reaches the target temperature,
the BELL button will blink, the controller will ding,
and if using the WEBER CONNECT app, you will
receive a push notification on your smart device.
11) All of these WEBER CONNECT module functions can
also be set wirelessly via Wi-fi or Bluetooth® from
the WEBER CONNECT app on your smart device.
WARNING
m
Risk of injury! The food temperature probes
m
are very sharp. Please be careful when
handling probes.
Risk of burns! Handling the food temperature
m
probes without hand protection will result in
severe burns. The coloured probe indicators
are not intended to be touched with bare
hands while using the barbecue as they are
not heat-insulated. Please wear heat-resistant
gloves at all times while using this product in
order to avoid being burned.
F F F
G G G
H H H
Food Temperature Probe Care
Cleaning the Food Temperature Probe
Clean the probe before first use. The probe should
be cleaned by wiping with water and a damp cloth.
The food temperature probes are not dishwasher
safe or waterproof and damage may result from
excessive water exposure. Never submerge the
probes directly in water or other liquids.
Storing Food Temperature Probe
Once cleaned, neatly wrap the probe when not in
use and store indoors.
15