Panel' S Operating Guideline - EAS Electric E150WHK User Manual

5.2.2 Panel' s operating guideline

1. Switch on/off operation
Switch on: When the unit in off state, if the user presses the
Switch off: When the unit in on state, if the user presses the
2.Checking and setting temperature
Under the main interface, the user can press the
the set temperature will display and flash. The set temperature can be adjusted by pressing the
or button and automatically saved. It will back to the main interface if 5 seconds without
any operation. or press the button to exit the temperature setting.
3.Working mode setting
The user can switch the modes between AUTO, ECO, FAST, and MULT by pressing the
button.
4.Time setting
Press the button to enter the time setting, hour and minute will flash， Press the
button to adjust the corresponding year (the initial value is 2000) setting； then press the
button to set the month, hour will flash, press the
value is 00)； Then press the button to set the date, and the minute will flash. Press the
or button to set the date (the initial value is 00)； Then press the
the hour will flash, press the / button to set the hour (the initial value is 00)； Then press
the button to set the minute, and the minute will flash. Press the
minute (the initial value is 00). After setting, press the
Remarks：
(1) If no operation for 30 seconds, the setting will automatically exit with failure;
(2) Press the button to complete the setup and exit;
(3) If the error is found in the previous setting, the user can press the
ing the setting to switch the hour and minute setting.
(4) After the date is completely set, the system automatically determine the current date is what
day in a week.
(5) Press the and button at the same time, and query the date. First the year is displayed,
and the month and day are displayed after 2 seconds.
V.2
button, the unit will switch on.
button, the unit will switch off.
or button to see the set temperature,
or
or button to set the month (the initial
button to set the hour,
and button to set the
button to exit the setting.
button before complet-
23
5.Timing setting
Press and hold the button 3S to enter the timer setting, the specific method is as follows:
Timing 1： When "1" light is on, enter into "timing 1 opening" setting. The "hour" light will flash, the
user can press or button to adjust the hour. After adjusting, press the
"minute" light will flash, the user can press
button again, it will enter into "timing 1 closing" setting, the setting way is the same " timing
1 opening" .
Timing 2: The user press the button again, the light "1" is out, and light "2" is on, it will enter
into "timing 2 opening" state, the setting way is the same "timing1".
Timing 3: The setting way is the same as "timing 1" and "timing 2".
If no any button pressed in 30 seconds, then automatically quit from the setting. The settings are
invalid.
During the setting process, hold and press the
and quit from the time setting.
6.Timing cancelling
Method 1: After timing setting successful, the user can hold and press the
at the same time for 3 seconds, the timing setting is cancelled. The light that represent the timing
setting successful will be out.
Method 2: The user can set the timing on and off of the corresponding time period to the same
time according to the timing setting method.
7.Weekly timing setting
This timing function is circulated timing. After successful setting, the unit will run at the set time
every day. The user can set up the time of starting and closing on a daily basis according to
need, and can also determine the switch time of the specific day in a week according to need.
8.Special date timing
Long pressing the button for more than 3 seconds. The digital light will be light from number
1 to 7 cyclically every one second, and the 7 numbers correspond to the 7 days of the week.
When the button is released, when the
setting can be started. The setting method is the same as weekly timing setting.
button, the
or button to adjust the minute. If pressing the
button for 3 seconds, then the setting is done
and buttons
button is released, the corresponding date time
V.2
24