Page 1
MELFORD TABLE Assembly Instructions 241/8762 - Please keep for future reference Dimensions Width - 160cm Depth - 90cm Height - 75.5cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline:...
Page 2
! Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand or put weight on Check you have all the •To reduce this product during assembly, the likelihood of components and tools listed on damaging your this could cause damage.
Page 3
Components - Panels If you have damaged or missing components, call the Customer Helpline: 0845 6400800 Please check you have all the panels listed below underside Top x 1 Side x 2 (142 x 89.5 cm) (90 x 75.5 cm)
Page 4
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5
Assembly Instructions Step 1 Attaching side a: Position sides to the sides of top so that the bolt holes are aligned. Step 2 Fitting b: Fix sides to top using bolts , washers and nuts with spanners Tighten all bolts. With help, turn the table over carefully.
Need help?
Do you have a question about the 241/8762 and is the answer not in the manual?
Questions and answers