Philips SP9851/70 Manual page 37

Table of Contents

Advertisement

Problem
Water is leaking
from the bottom
of the appliance.
SmartClean system
Problem
The SmartClean
system does
not work when I
press the on/off
button.
The shaver is not
entirely clean
after I clean it in
the SmartClean
system.
Possible cause
During cleaning,
water may collect
between the inner
body and the
outer shell of the
appliance.
Possible cause
The SmartClean
system is not
connected to the
wall socket.
The cleaning
cartridge is empty.
The replacement
symbol flashes to
indicate that you
have to replace the
cleaning cartridge.
You have not
placed the shaver
in the SmartClean
system properly, so
there is no electrical
connection
between the
SmartClean system
and the shaver.
The cleaning
cartridge needs to
be replaced.
Solution
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
Solution
Put the small plug in the
SmartClean system and put
the supply unit in the wall
socket.
Place a new cleaning
cartridge in the SmartClean
system (see 'Replacing the
cartridge of the SmartClean
system').
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
Replace the cleaning
cartridge (see 'Replacing
the cartridge of the
SmartClean system').
39
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp9811/65

Table of Contents