Table of Contents
Advertisement
Problem
The appli-
ance does not
shave as well as
it used to.
Possible cause
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
Solution
Recharge the battery
(see 'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Clean the shaving heads
thoroughly or replace
them. Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
Replace the shaving heads
(see 'Replacement').
Clean the shaving
heads in the regular
way (see 'Cleaning and
maintenance') or clean
them thoroughly.
To clean the shaving
heads thoroughly, remove
the shaving heads
from the shaving head
holder one by one (see
'Replacement'). Then
separate the cutter from
its guard and rinse each
matching set under the
tap. After rinsing, place
the cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder
(see 'Replacement').
37
English
Advertisement
Table of Contents
