Connecting To A Transmitter; Microphone Powering - Shure WCM16 Quick Start Manual

Headset condenser microphone

Hide thumbs Also See for WCM16:

Shure Incorporated

Connecting to a Transmitter

The WCM16 is configured for direct connection to a Shure Body-Pack Transmitter, such as models T1, T1G, T11,

SC1, EC1, or LX1, using the attached cable.

The WCM16 is designed to be powered from the +5 Vdc source at microphone connector pin 2 of a Shure trans

mitter.

Specifications

(Measured using test circuit in Figure 4)

Type

Condenser (electret bias)

Frequency Response

50 to 18,000 Hz

Polar Pattern

Hypercardioid, uniform with frequency

Output Level (close-talked at 1,000 Hz)

Open Circuit Voltage -55.0 dBV (1.8 mV at 0.6 m) 1 Pascal=94 dB SPL

Maximum Sound Pressure Level

150 dB at 1%THD

Dynamic Range

121 dB

Output Noise

29 dB equivalent SPL, A-weighted

3/6