Table of Contents
Advertisement
3
1
¼" / 6 mm
⅜" / 10 mm
4
8
¼" / 6 mm
3
1
⅜" / 10 mm
10 mm
English
Drill the screw holes.
Install the anchors.
Seal the wall around the anchors using waterproof
sealant.
Failure to seal the wall may lead to
water damage.
2
Wrap the threads on the nipples using Teflon tape.
Install the threaded connections on the nipples.
Tighten them using a 10 mm Allen wrench (not
included).
The connections should extend 1⅝" – 1¾" outside
the surface of the finished wall.
Seal the wall around the nipples using waterproof
sealant.
Failure to seal the wall may lead to
water damage.
Advertisement
Table of Contents
