02
Assembly Method
1. Safely remove all the parts enclosed in the box.
(Please make sure that there are no parts left behind).
2. Place it on a flat surface to avoid scratching.
3. Lay the product forward, and then insert the center connecting
support into the groove on the bottom of the product.
* Caution: Fit the first side of the 'center connecting support' to the fixing device.
4. Insert the 'four-foot support' all the way inside the fixing device.
Foot rest rubber
Four-foot support
* When assembling and installing, put down the product slowly. If you rush this
procedure, there is a risk of damage to the product or personal injury.
8
9
Tension controller
Center connecting
support
Joint support
Joint groove
Joint Fixture device
Body