02
Assembly Method
1. Safely remove all the parts enclosed in the box.
(Please make sure that there are no parts left behind).
2. Place it on a flat surface to avoid scratching.
3. Lay the product forward, and then insert the center connecting
support into the groove on the bottom of the product.
* Caution: Fit the first side of the 'center connecting support' to the fixing device.
4. Insert the 'four-foot support' all the way inside the fixing device.
5. Plug the connector to the sockets and turn the fastern to the right
to fix it firmly.
Foot rest rubber
Four-foot support
* When assembling and installing, put down the product slowly. If you rush this
procedure, there is a risk of damage to the product or personal injury.
8
9
Tension controller
Center connecting
support
Joint support
Joint groove
Joint Fixture device
Body