Unit Description - pass & seymour legrand LightSense PSWCF Installation Instructions Manual

Wireless fan control
Table of Contents

Advertisement

UNIT DESCRIPTION

The LightSense™ PSWCF Wireless Fan Control conveniently offers silent,
one-touch control of one or two ceiling paddle fans, with a combined current
rating up to 1.5 amps. The PSWCF has five buttons to provide 4 speed
controls, plus off. One touch of the rocker paddle can also turn the fan off, or
turn it on and resume the most recently used speed.
LightSense Wireless
LightSense wireless devices use radio signals to communicate with each other
to control lighting and other types of electric loads in selected areas. They use
the 900MHz band for high-speed control communication. Using the patented
"frequency-agile" Top Dog™ technology, LightSense wireless devices avoid
interference with other 900MHz devices, such as cordless phones and baby
monitors.
CAUTION
THIS UNIT IS EXCLUSIVELY DESIGNED FOR USE WITH CEILING FANS.
Do not use to control lighting, receptacles
or transformer-operated devices.
Do not use for a fan and a light wired together on the same load wire.
Do not wire in the same circuit as a GFCI circuit breaker or receptacle.
INSTALL IN COMPLIANCE WITH ALL
APPLICABLE CODES & STANDARDS.
Failure to follow these instructions may cause
personal injury or equipment damage.
Call 800.223.4185 for Technical Support

Advertisement

Table of Contents
loading

Table of Contents