Table of Contents
Advertisement
340746_RevC_PSWCR.qxd:340746_RevC_PSWCR
10/23/08
10:49 AM
Page 6
UNIT DESCRIPTION
The LightSense™ PSWCR Wireless Room Scene Controller is a room level
scene controller. It provides instant recall of five user-recorded lighting scenes
(or presets) assigned to a room or designated area. It also provides off and on
functions and overall control of the roomʼs light level.
The PSWCR can be identified by the icon on its front, which
resembles the outline of a door leading to a room.
The LightSense wireless room scene controller works as part of a
LightSense wireless system. It can control a variety of LightSense wireless
devices including dimmers, switches, plug-in appliance modules and plug-in
lamp modules.
You can control up to fifteen scenes in the room (see MORE SCENES section).
You can install additional room scene controllers or PSWRR room scene
remotes to control those scenes from multiple locations.
Note: To control the entire house, use a LightSense wireless house scene
controller (a wall mounted PSWCH or a handheld PSWRH remote).
LightSense Wireless
LightSense wireless devices use radio signals to communicate with each other
to control lighting and other types of electric loads in selected areas. They use
the 900MHz band for high-speed control communication. Using the patented
"frequency-agile" Top Dog™ technology, LightSense wireless devices avoid
interference with other 900MHz devices, such as cordless phones and baby
monitors.
Application Assistance
The LightSense Installation Guide provides more information about configuring
scenes. Instructions for installation and use are included with the relevant
LightSense wireless devices. Application support information and the
LightSense Installation Guide are available at the Pass & Seymour/Legrand
website, www.passandseymour.com.
Call 800.223.4185 for Technical Support
Advertisement
Table of Contents
