Table of Contents
Advertisement
340746_RevC_PSWCR.qxd:340746_RevC_PSWCR
SET HOUSE ID
All LightSense™ wireless devices installed in the same home must acquire the
same unique House ID before use. This process is known as house binding.
Each LightSense wireless device is bound to all other LightSense wireless
devices in the house.
New Installation
1. With all devices installed and energized, make sure that every LightSense
wireless device LED is yellow. If
any LED is off, be sure the circuit
breaker is on and the device is
correctly installed.
2. Press
on any device paddle
until the LED flashes yellow (about
2 seconds). This indicates that it
has acquired a unique House ID.
3. Make sure that all other LightSense wireless device LEDs are flashing
green, indicating that they have acquired the same House ID.
4. Return to the device used in step 2, which is still flashing yellow. Press
until the LED changes to solid green (about 2 seconds). All device LEDs in
the House change to solid green, indicating house binding is complete.
Adding an PSWCR to an Existing Installation
If youʼre adding or replacing a PSWCR in a LightSense wireless installation that
is already operating, the new PSWCR must acquire the same House ID as the
other LightSense wireless devices in the house. After the new PSWCR is
powered up, the LED should be solid yellow. This indicates that it has not yet
acquired a House ID. To acquire the House ID for the existing system:
1. Press
on any previously bound device until the LED flashes yellow
(about 2 seconds).
2. Verify that the newly added PSWCR LED is flashing green, indicating that it
has acquired the House ID.
3. Return to the same previously bound device used in step 1 and press
until the LED changes to solid green (about 2 seconds). All device LEDs
should now be solid green.
When you see
the instructions,
touch the top of the
paddle as directed.
10/23/08
When you see
in the instructions,
firmly press and
hold both the top
and bottom of the
paddle until the
LED changes
(about 2 seconds).
in
When you see
the instructions, touch
the bottom of the
paddle as directed.
10:49 AM
Page 8
in
Advertisement
Table of Contents
