Do you have a question about the WR-26F and is the answer not in the manual?
Questions and answers
Games
February 9, 2025
how to reset it is not in English now ... so I can not use it
1 comments:
Mr. Anderson
May 14, 2025
To reset the Ocean Digital WR-26F to English language, you need to perform a factory reset. Press and hold both the Power On/Off and Mode buttons until the radio turns off. This will reset all settings, including the language, back to the factory default, which is English.
Contents 1. Introduction to the WR-26F Internet Radio ....4 2. Location of controls ..........5 3. Choosing options and functions ........7 4. Network Setup ............8 5. Overview of Radio modes and functions ....10 6. My Favorite ............12 7. Internet Radio ............13 8.
Introduction to the WR-26F Internet Radio The WR-26F Internet Radio is a compact and light weight portable radio with an internal 2000 mAh Li-Ion rechargeable battery for many hours of audio entertainment and a gateway into the world of digital audio.
Page 6
Location of controls 1) Press and Hold – turn On/Standby (On/Off without USB power) 2) Press and Hold – add to Favorite list Press and Release – display the Favorite list 3) Main menu – go to My Favorite 4) Confirm selection Internet Radio –...
Choosing options and functions All user input is information that the Radio uses to provide the desired audio entertainment with select (OK button) a confirmation and go to command. Navigate to a function (i.e. My Favorite, Internet Radio, Media Center, FM Radio, Bluetooth, Sleep Timer and Configuration) or a position in a list by using the Move Forward (►), Move Back (◄), Move Up (▲) and Move Down (▼) controls.
Network Setup The Internet Radio must have a high bandwidth internet connection and a wireless (Wi-Fi) home network connected to it to be fully functional. To configure the Wi-Fi network connection turn on the radio by pressing and holding [ ] button until the display illuminates - this normally takes 3 - 5 seconds.
Page 9
Network Setup To repeat the above procedure, or if the Configure Network wizard does not automatically start, the network can be connected by using the Configuration mode. 1) Press the [ ] button to go to the mode selection options 2) Select Configuration 3) Select Network There are two different options to connect to the network...
Overview of Radio modes and functions To Select any mode use the Menu button [ ] on top of the radio to display the My Favorite screen: My Favourite Internet Radio > Media Center FM Radio Bluetooth Sleep Timer Configuration Navigate through the modes to find and Select any of these functions: 1) My Favorite –...
Page 11
Overview of Radio modes and functions 6) Sleep Timer – Select a time delay before the Radio goes to Standby mode while playing your selected audio entertainment source – only available if the radio is connected to a USB charger. 7) Configuration –...
My Favorite This mode displays a list of up to a maximum of 99 audio sources that have been Preset (stored) using the Preset button ( ) on top of the radio while an audio source is playing. After the first 99 presets the next Preset will be stored in the first location, the next in the second location continuing to overwrite each list location until it loops back to the first location again.
Internet Radio Select Internet Radio mode using the [ ] button on the top of the radio and navigate to Internet Radio. Navigate the extensive list of available worldwide radio stations using these options: 1) Skytune – Select a radio station using the structured lists that aid and reduce the task of finding the right station.
Page 14
Internet Radio SWR3 −−> FAV < 10/30 5:55 A maximum of 99 Presets can be added to the list before the next Preset will overwrite the first item in the list. Use list Edit options to move an entry Down, Up or Delete by highlighting the station to edit and pressing the Move Forward button ( ►...
Media Center The Radio supports the industry standard Universal Plug and Play (UPnP) and Digital Living Network Alliance (DLNA) standards. This enables the Radio to browse and play music files located on an UPnP or DLNA server provided the server has been setup to allow sharing of files on the network.
FM Radio Select FM Radio and press [ OK ] button if option to Scan and Preset FM Stations is displayed or if a list of Preset FM stations is displayed select station to start listening. FM 89.50 MHz FM 92.10 MHz <...
Bluetooth Speaker After selecting Bluetooth the display will show the Radio’s Bluetooth identifier code and connection status. If it is not connected “pairing” must take place with the audio source Bluetooth device. When the Radio’s identification code appears in the list of local Bluetooth devices on the audio source Bluetooth device pair the two devices so that they can recognize each other and will automatically connect whenever the...
Sleep Timer To save battery power the Sleep Timer function, we prefer to use this function with the radio is connected to the USB charging power source via the USB cable Set the timer to turn the radio off after the selected time elapsed in the range of 15 to 180 minutes.
Configuration Select Configuration for a list of adjustments and options to be displayed, navigate the list and select the desired function, use the Move Forward / Back ( ►/◄ ) controls to go forward or backwards in the decision tree and press [OK] button to make selection.
Page 20
Configuration Language – Select language FM Setup – Options to select FM area, scan for FM stations to create station list and display station list Local Radio (United States) – Option to automatically set local stations or set manually Playback Setup – Options to repeat all, repeat one, shuffle or normal Resume play options –...
Skytune Web Application for Internet Radio www.skytune.net Browse / Search On the opening page click Browse / Search at the lower right side of the page. Enter the name of a Radio Station or Browse the structured list of stations available, select the one of interest and click on the heart symbol ( ) - the station logo is displayed.
Page 22
Skytune Web Application for Internet Radio www.skytune.net in the Add Channel section along with selecting the Country where it is located and Genre of audio entertainment it provides. Smart Phone, Tablet or Computer Control With device connected to the same Wi-Fi network as the Radio use web browser to edit lists and add radio stations.
Problems and Solutions Cannot connect to the Wi-Fi Network a) Common Causes • Incorrect passcode / password for the selected Network. • Location of the Radio has a weak Wi-Fi signal – if possible check with another Wi-Fi connected device in the same location or move to a location closer to your router.
Page 24
Problems and Solutions Internet connection checked by the ISP (Internet Service Provider). Internet Radio cannot play some stations • The station may not be streaming – not all stations stream for 24 hours a day. • There are too many users at this time – some stations have a limited number of users they can support at any given time.
Technical Specification Model: WR-26F DC Power Input: 5 Volts 1 Amp. (USB) Battery: Li-Ion 2000 mAh Wi-Fi Wireless Network: IEEE 802.11b/g/n (5 GHz only version ac – not supported) Frequency: 2.4 GHz Security: WEP, WPA, WPA2 Bluetooth Version: V4.2 BR, EDR Compliant Frequency: 2.4 GHz...
Page 26
This system is financed by the industry and ensures environmentally responsible disposal and the recycling of valuable raw materials. Ocean Digital Technology Ltd. Flat B, 12/F., Yeung Yiu Chung (No.8) Ind. Bldg., 20 Wang Hoi Road, Kowloon Bay, Hong Kong Email: support@oceandigital.com.hk...
Need help?
Do you have a question about the WR-26F and is the answer not in the manual?
Questions and answers
how to reset it is not in English now ... so I can not use it
To reset the Ocean Digital WR-26F to English language, you need to perform a factory reset. Press and hold both the Power On/Off and Mode buttons until the radio turns off. This will reset all settings, including the language, back to the factory default, which is English.
This answer is automatically generated