Checking The Fuel Level, Refuelling; Checking The Controls - Komatsu WA95-3 Operation & Maintenance Manual

Checking the Fuel Level, Refuelling

WARNING
Danger of fire! Fuel that has spilled over may ignite!
Immediately remove fuel that has spilled over.
1. Turn the start switch to the operating position 'I' and check the fuel
level indicated on the fuel level indicator.
A - fuel tank full
B - fuel tank half-full
2. Then, return the start switch to the stop position '0'.
3. If required, refuel via the filler (1).
For detailed information on fuels, see section "Lubricants and Ser-
vice Fluids".
4. After refuelling, firmly close the filler.

Checking the Controls

1. Turn the start switch to the operating position 'I'.
An alarm buzzer sounds until the machine is started.
2. Check that the following alarm and control indicators are on until the
engine is started:
Charging current (1)
Engine oil level (2)
Parking brake (3)
Intake air preheater (4)
3. Check that the fuel level indicator (5) indicates the fuel level in the
fuel tank.
NOTE
Contact your responsible Komatsu dealer, if one or several of the
indicators do not light up.
Do not only use the indicators to perform the checks prior to start. Always
perform the work described as regular maintenance, too.
Maintenance Prior to Start
0
I
P
II
0
I
P
II
7 5 _ 2 0 9
1
75 _ 2 11
7 5 _ 2 0 9
7-25