Table of Contents
Advertisement
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Monitor Controls
Advanced Settings
Port Settings
Menu Settings
Exit
Input Signal: HDMI
To use the controls:
1.
Press
2.
Use
or
If there is a sub-menu, you can move between options using
select that function. Use
3.
Press
4.
Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, Press and hold
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
6.
The ENERGY STAR option resets all user settings to default values so that the monitor
can meet the requirements of Energy Star.
Energy Star is an energy saving program for consumer electronics led by the U.S.
government. It was launched in 1992 by EPA and DOE to reduce energy consumption and
greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and
environmental protection. It improves the concept of energy efficiency of consumers and
manufacturers, and effectively guides the market.
The regulation of Energy Star improves energy efficiency and reduces air pollution by
using more energy-efficient equipment in homes, offices and factories. One way to
achieve this goal is to use management to reduce energy consumption when products are
not in use. The default settings for monitors conform to Energy Star certification. Any
E20-20
®
Brightness
Contrast
Resolution: 1920x1080
to open the main OSD menu.
to move among the icons. Select an icon and press
or
to make adjustments. Press to save.
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
75
75
Refresh Rate: 60Hz
or
for 10 seconds to unlock the OSD and allow
to access that function.
then press
to
for 10 seconds to
2-4
Chapter 2.
Advertisement
Table of Contents
