Setting Up Your Monitor; Connecting And Turning On Your Monitor - Lenovo ThinkVision E20-20 User Manual

Setting up your monitor

This section provides information on how to set up your monitor.

Connecting and turning on your monitor

Note: Be sure to read the Safety information on page iii before carrying out this procedure.
1.
2.
3.
Power off your computer and all attached devices, then unplug the computer power cord.
Connect one end of the analog signal cable to the monitor VGA (Analog) connector and
the other end to the computer.
Connect the digital cable to the HDMI connector of the monitor and the other end on the
back of the computer.
HDMI
1-5
Chapter 1.