Mercedes-Benz S-Class Maybach Owner's Manual page 405

402 Wheels and tyres
402
Lower ering t Low ing the v he vehicle ehicle a er a er a wheel c a wheel change
R R eq equir uirements: ements:
The new wheel has been tted (
R
* NO
NOTE TE Risk of vehicle jack becoming trap-
ped by the AIRMATIC system
If the AIRMATIC system has released air when
raising the vehicle, the jack can become trap-
ped when the vehicle is lowered.
Start the engine. This adapts the vehicle
#
level.
Remove the jack from under the vehicle.
#
T T o low o lower t er the v he vehicle: ehicle: place the ratchet onto
#
the hexagon nut of the jack so that the letters
"AB" are visible and turn anti-clockwise.
hange
page 401).
/
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
an initial maximum force of 80 Nm.
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
the speci ed tightening torque of 150 Nm.
& W W ARNING
ARNING Risk of accident due to incor-
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed torque.
Ensure that the wheel bolts or wheel
#
nuts are tightened to the prescribed
tightening torque.
If you are not sure, do not move the vehi-
#
cle. Contact a quali ed specialist work-
shop and have the tightening torque
checked immediately.
Check the tyre pressure of the newly tted
#
wheel and adjust it if necessary.
%
The following does not apply if the new wheel
1 to 5 with
is an emergency spare wheel.
V V ehicles wit ehicles with a tyr
#
t t em: em: restart the tyre pressure monitoring sys-
1 to 5 with
tem (
/
h a tyre pr e pressur essure monit e monitor oring sy ing sys- s-
page 393).