Mercedes-Benz S-Class Maybach Owner's Manual page 319

316 MBUX multimedia system
316
Se Setting up a W tting up a Wi-F i-Fi ho i hotspot tspot
R R eq equir uirements: ements:
The Wi-Fi function is activated on the multime-
R
dia system and the communication device to
be connected.
The communication device to be connected
R
supports at least one of the types of connec-
tion described.
The connection types shown depend on the
device to be connected. The function must be
supported by the multimedia system and by
the device to be connected. The type of con-
nection established must be selected on the
multimedia system and on the device to be
connected.
% Some functions may rst need to be activated
on the communication device being connec-
ted. More detailed information can be found
in the manufacturer's operating instructions.
%
The use of the vehicle data tari by external
devices is not available in all countries.
Multimedia system:
© Settings System
4 5 5
Internet and Bluetooth
5
%
The availability of the functions is dependent
on the country.
Select Wi-Fi.
#
The controller is to the right: Wi-Fi is switched
on.
When the Wi-Fi function is switched on, you can
connect the multimedia system with external hot-
spots or make it available as a hotspot for external
devices.
When the Wi-Fi function is switched o , it is not
possible to establish a hotspot connection.
When the Wi-Fi function is switched o , no con-
nection can be established with the MBUX rear
tablet.
%
The data volume can be purchased dir directl
fr from a mobile phone ne om a mobile phone netw twor ork pro
Mercedes me Portal.
%
The use of the vehicle data tari by external
devices is not available in all countries.
Using the multimedia syst Using t he multimedia system as a W
Select
#
Select one of the following connection
#
options.
Connecting using a QR code Connecting using a QR code
Requirement: an app for scanning the QR code is
installed on the device being connected.
Alternatively: the device being connected has an
integrated QR code scanner (see manufacturer's
operating instructions).
Scan the QR code shown.
#
The Wi-Fi connection is established.
Connecting using NFC Connecting using NFC
Activate NFC on the device to be connected.
#
When the NFC icon is displayed in the
#
hotspot
ted to the NFC interface.
ectly y
Follow the instructions on the device.
k provider vider via the #
The Wi-Fi connection is established.
em as a Wi-F i-Fi ho i hotspot
MBUX hotspot.
menu, hold the device to be connec-
tspot
MBUX