Mercedes-Benz S-Class Maybach Owner's Manual page 403

400 Wheels and tyres
400
* N N O O TE TE Vehicle damage from the jack
If you do not position the jack correctly at the
appropriate jack support point of the vehicle,
the jack could tip over with the vehicle raised.
The jack is designed exclusively for jack-
#
ing up the vehicle at the jack support
points.
Take the ratchet ring spanner out of the tyre-
#
change tool kit and place it on the hexagon
nut of the jack so that the letters "AUF" are
visible.
Position support 2 of jack
#
port point 1.
Turn ratchet ring spanner 3
#
jack support 2 sits completely on jack sup-
port point 1 and the base of the jack lies
evenly on the ground.
Continue to turn ratchet ring spanner
#
the tyre is raised a maximum of 3 cm o the
ground.
Loosen and remove the wheel (
#
R R emo emoving a wheel ving a wheel
R R eq equir uirements: ements:
The vehicle is raised.
R
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
* NO
NOTE TE Damage to threading from dirt on
wheel bolts
4 on jack sup-
Do not place wheel bolts in sand or on a
#
dirty surface.
clockwise until
Unscrew the uppermost wheel bolt com-
#
pletely.
3 until
page 400).
/