Adesso Sabrina Assembly Instruction

Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
Sabrina LED Floor Lamp
Model#5176-22
1. Insert lamp body (C) into washer (B) and
base (A), then tighten it with washer (D) and
nut (E) by using wrench (F).
2. Insert G9 LED bulb (G) onto each socket.
3. Place opal glass shade (H) onto each
socket and turn it clockwise until tight.

GENERAL PRODUCT INFORMATION:

This product is suitable
for dry locations only.
---------------------------------------------------------------

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug as a
feature to reduce the risk of electric shock (one
blade is larger than the other). This plug will fit in
a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.Do
not use with an extension cord unless the plug
DO NOT ALTER THE
can be fully inserted.
PLUG .
-------------------------------------------------------
BULB TYPE: Use only with maximum of
3*G9 3.5W LED bulb (bulb included).

PARTS DIAGRAM

(1) * Washer (B)
(1) * Tuerca (E)
(3) * G9 LED bulb (G)
th
353 West 39 Street, 2
Tel: (212) 736 4440 Fax: (212) 736 4806
5176-22 1.0
(1) * Washer (D)
(1) * Llave (F)
(3)*Opal glass shade (H)
nd
Floor, New York, NY 10018
www.adessohome.com