Table of Contents
Advertisement
2.
Turn on the impeller speed control.
3.
Set the impeller speed to the appropriate setting.
4.
Move the throttle to the F
5.
Open the hopper gate and begin spreading.
1. Effective spreading width—variable 1.2 to 6.7 m (4 to 22 ft)
6.
Evaluate the spread pattern. If adjustments are needed, refer to
7.
When finished spreading, close the hopper gate.
position and drive forward.
AST
Figure 18
Spreader Pattern Adjustment (page
16
g207728
17).
Advertisement
Table of Contents
