How To Hang Your Ceiling Fan - Fanimation EDGEWOOD FP9060 Series Instructions Manual

How to Assemble Your Ceiling Fan (Close-to-Ceiling)-Continued
3. Route your fan wires and safety cable through the
canopy trim ring and ceiling canopy. (Figure 3)
4. Align the three big slots in the ceiling canopy to the
three screws in the motor coupler. Firmly attach the
canopy cover to the motor with the previously
removed screws. (Figure 4)
To avoid possible fire or shock, be sure electricity is
turned off at the main fuse box before hanging.
(Figure 1)
NOTE: If you are not sure if the outlet box is
grounded, contact a licensed electrician for advise,
as it must be grounded for safe operation.
The fan must be hung with at least 7' of clearance from
floor to blades. (Figure 2)

How to Hang Your Ceiling Fan

WARNING
WARNING
NOTE: MOTOR WIRES
HAVE BEEN OMITTED
FROM DIAGRAM
Motor
Assembly
NOTE: MOTOR WIRES
HAVE BEEN OMITTED
FROM DIAGRAM
Motor
Assembly
Ceiling
Floor
9
Ceiling
Canopy
Canopy
Trim Ring
Figure 3
Screws (3)
Ceiling
Canopy
Figure 4
Main Fuse Box
Figure 1
No
less than
7 ft
Figure 2