Oki C911 Product Specification page 101

Priority Status Message
2 Fuser Mount Signal Warning
3
□
214 1
2 Change Fuser Unit
3
□
214.1 1
2 Non OEM Belt Unit Detected
3
□
214.2 1
2 Incompatible Belt Unit
3
□
214.3 1
2 Non Genuine Belt Unit
3
□
215 1
2 Change Belt Unit
3
□
216 1
2 Change Waste Toner Box
3
□
219 1
2 %COLOR% Toner Empty
3
□
219.5 1
2 %COLOR% Toner Empty
3
45530603TX
Ready Atten
LED LED
This warning is cleared when a normal signal is detected at a signal check by opening and
closing the cover.
Varies On Notifies the life of the fuser unit (warning). Displayed in a combination of other message in
the first line. Warning only (No Life error).
This appears when the cover was opened and closed just after the fuser life error
occurred.
Varies On Indicates detection of a belt unit that is not optimal.
Varies On Indicates detection of a belt unit that is not optimal.
Varies On Indicates detection of a belt unit that is not optimal.
Varies On Notifies the transfer belt is end of its life (Warning).
This status message is displayed when opening/closing a cover or turning power on again
after the transfer belt life error or belt waste toner full error occurs.
Varies On Indicates that there is no free space in the waste toner box.
This is just a warning, and printing does not stop.
Varies On Notifies toner is empty.
This status message (warning) is displayed when opening/closing a cover or turning power
on again after the toner empty error occurs.
%COLOR%
Yellow
Magenta
Cyan
Black
White
Clear
Varies On Indicates that toner cartridge is empty.
When there are not print data, it is displayed.
If either of CMY occurs,
when it receives the monochrome data or monochrome+spot color data, prints the data.
when it receives the color data, turn into the Empty Error of Priority=334 and cannot print it.
If either of spot color occurs,
when it receives the monochrome data or color data, prints the data.
when it receives the spot color data, turn into the Empty Error of Priority=334 and cannot
print it.
In fact, K can not occurs. When K toner cartridge is empty, even there are no print data,
turn into the Empty Error of Priority=334.
%COLOR%
Yellow
Magenta
− 101／130
沖データ企業秘密・Oki Data CONFIDENTIAL
Function Status level Status code
Error code
Warning 10091
Warning 10659
Warning 10660
Warning 10661
Warning 10080
Warning 10948
Warning 10966 (Y)
10967 (M)
10968 (C)
10965 (K)
10681 (W)
10682 (L)
Warning 10966 (Y)
10967 (M)
10968 (C)
10681 (W)
10682 (L)