Vax FORCE 10 CYCLONIC Instruction Manual page 5

Vax VZL 401CSP User Guide.qxd:VZL-401CSP User Guide
Floor/Carpet Cleaning
Move the handle and adjust it to the desired position for
(a) storing the upright, (b) operating the cleaner, and (c)
de-press the handle release pedal again to clean under
furniture. NOTE: Brushbar could cause rug fringe area to
become tangled within cleaner. Use caution when
vacuuming throw rugs with fringe.
Fig.4/4
Using the Accessories
Cleaner must be in its upright position to raise brushbar.
Turn carpet height adjuster to long carpet pile setting
(Fig.4/5).
Fig.4/5
Remove the lower hose from the base of the cleaner and
the upper hose from the hose caddy (Fig.4/6).
Fig.4/6
All manuals and user guides at all-guides.com
3/9/08 16:43
Any of the accessories can be directly attached to the
hose end or the end of the extension wand (Fig.4/7).
Fig.4/7
Simply push the attachment
firmly onto the end of the
extension wand. To remove
tool, twist and pull apart
gently (Fig.4/8).
The TurboTool is ideal for
lifting pet hair off carpets,
stairs and upholstery. The
TurboTool is most effective
when using backward
strokes over the area that
is being cleaned .
Carry Handle
Use the carry handle located
on the top of the dirt
container lid to move the
cleaner from room to room
(Fig.4/9).
Page 5
Vax Careline 0870 606 1248
Fig.4/8
Fig.4/9
5
how to operate