Vectaire ELIX 1003 Installation And Operating Instructions Manual
Energy efficient centrifugal fan with ec motor
Hide thumbs
Also See for ELIX 1003:
- Installation and operating instructions manual (10 pages) ,
- Installation and operating instructions (5 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Vectaire ELIX 1003
Summary of Contents for Vectaire ELIX 1003
- Page 1 ELIX 1003 Energy Efficient Centrifugal Fan with EC Motor Installation and Operating Instructions • 3 speed continuous running • SAP PCDB Listed • 6 models: - standard - timer - humidity control - SELV - low voltage • for all domestic wet rooms •...
- Page 2 "Elix 1003” - CENTRIFUGAL FANS WITH EC MOTOR INSTALLATION and OPERATING INSTRUCTIONS THIS LEAFLET MUST BE AVAILABLE TO THE USER The product you have purchased is an extractor correctly. Do not attempt to use or repair the fan for exhausting directly outside or through product before doing this.
-
Page 3: Dismantling & Recycling
• The electrical supply to which the fan is connected must comply with all existing regulations. All installations must comply cause damage to people, animals or property, with current IEE wiring regulations. for which the manufacturer cannot be held liable. •... - Page 4 RANGE Trickle Speed 1 - 8 lt/sec - 28.8 m³/h the boost switch is turned off. After this, the fan will Trickle Speed 2 - 14 lt/sec - 50.4 m³/h continue at high speed for the length of time set on the timer overrun adjustment, between 0 and 30 ELX1003 minutes (see Trimmer Adjustment diagram).
- Page 5 INSTALLATION IMPORTANT 1. Check there is nothing missing in box and If the fan is installed in a ceiling with a remove front cover. vertical duct passing through an unheated space, 2. Drill hole in wall - allow extra width if using a condensation trap MUST be fitted.
- Page 6 INSTALLATION...
- Page 7 INSTALLATION...
- Page 8 INSTALLATION...
-
Page 9: Wiring Diagrams
WIRING DIAGRAMS ELXs - 230V - 3 Speed with Cord ELXs - 230V - 3 Speed via remote switch N.B When installing fans via a remote switch, pullcord switch must be put in the "off" position and the cord removed. ELXs - SELV - 3 Speed with Cord ELXs - SELV - 3 Speed via remote switch SELV... - Page 10 JUMPER SWITCH - 230V Versions These fans are designed to run continuously at one of two trickle speeds fixed at installation using the jumper switch. The configurations for the various models are:...
- Page 11 JUMPER SWITCH - SELV Versions These fans are designed to run continuously at one of two trickle speeds fixed at installation using the jumper switch. The configurations for the various models are:...
-
Page 12: Trimmer Adjustment
NOTE: The motor does not require lubrication as it is maintenance free "sealed for life" type. Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RH Tel: +44 (0)1494 522333. Fax: +44 (0)1494 522337. Email: sales@vectaire.co.uk Elix1003 010521 E & O.E...