Table of Contents
Advertisement
Quick Links
The Carbon Friendly Fan
Installation and Operating
Instructions
• 5 models:
- SAP Appendix Q Eligible
3 speed continuous running
with or without filter
- humidity control
- SELV - low voltage:
- 3 speed continuous
running
- humidity control
• for all domestic wet rooms
• for walls or ceilings
IPX4 IPX7
Advertisement
Table of Contents
Related Manuals for Vectaire eSmile
Summary of Contents for Vectaire eSmile
- Page 1 The Carbon Friendly Fan Installation and Operating Instructions • 5 models: - SAP Appendix Q Eligible 3 speed continuous running with or without filter - humidity control - SELV - low voltage: - 3 speed continuous running - humidity control •...
- Page 2 "E-Smile” - THE POWERFUL CARBON FRIENDLY FANS INSTALLATION and OPERATING INSTRUCTIONS THIS LEAFLET MUST BE AVAILABLE TO THE USER The product you have purchased is an extractor • The use of any electrical product requires fan for exhausting directly outside or through medi- compliance with some basic rules which are um lengths of ducting and is suitable for wall or listed below: ceiling installation.
- Page 3 • Always request original spare parts for repairs • If the product is sited in a room containing a • If the product needs to be removed, turn off the fuel burning appliance which is not of the bal- mains supply circuit-breaker and then discon- anced flue type, the installer must ensure that nect the fan.
-
Page 4: Installation
allows the fan to run at low speed for its over-run INSTALLATION period. The humidistat is adjustable from 40% to 90% relatve humidity. ES1003CLV - 12v SELV version of ES1003 ES100H2CLV - 12v SELV version of ES100H2C... - Page 6 INSTALLATION Fig 1: check there is nothing missing in box and that instruction leaflet is included Fig 2: drill hole in wall - minimum dia 99.8mm - allow extra width if using ducting - it is the installer's responsibility to use the appropriate core cutter to obtain the correct hole diameter.
-
Page 7: Wiring Diagrams
WIRING DIAGRAMS ES1003 - 3 Speed with Cord VIA LIGHT SWITCH ES1003 - 3 Speed with Cord removed ES1003CF - 3 Speed with Cord & Filter ES1003CF - 3 Speed with Filter - Cord removed ES100H2C - Humidity Control with Cord ES100H2C - Humidity Control - Cord removed VIA REMOTE ILLUMINATED SWITCH ES1003 - 3 Speed with Cord removed ES1003CF - 3 Speed with Filter - Cord removed... - Page 8 SELV with Cord SELV with Cord removed ES1003CLV - 3 Speed with Cord ES1003CLV - 3 Speed with Cord removed ES100H2CLV - Humidity Control with Cord ES100H2CLV - Humidity Control - Cord removed SELV Products All SELV (safety extra low voltage) products must be installed to conform to IEC 60364.
-
Page 9: Operation
OPERATION ES1003, ES1003CF, ES1003LV - these fans operate at this speed until the humidity has been combine the latest technology with energy saving dispersed. The user can use the cord to operate and efficiency. They are quiet running, 3 speed the fan (at its higher speed), or to boost the fan fans, designed to run continuously at a pre- speed if it is already running. - Page 10 ADJUSTMENT OF TRIMMERS To adjust the humidistat and timer trimmers, to decrease sensitivity and set at a higher level of remove the front cover of the fan (Fig 13) and relative humidity. open the plastic cover to access the trimmers (Fig The timer is adjustable between 3 and 25 min- 14).
-
Page 11: Maintenance
This product has been designed and constructed using high-quality materials and components that can be recycled or re-used. Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RH Tel: +44 (0)1494 522333. Fax: +44 (0)1494 522337. Email: sales@vectaire.co.uk Web: www.vectaire.co.uk ESmile 240717 E & O.E...