Vectaire ELIX 1003 Installation And Operating Instructions Manual
Energy efficient centrifugal fan
with ec motor
Hide thumbs
Also See for ELIX 1003:
- Installation and operating instructions (5 pages) ,
- Installation and operating instructions manual (12 pages)
Related Manuals for Vectaire ELIX 1003
Summary of Contents for Vectaire ELIX 1003
- Page 1 ELIX 1003 Energy Efficient Centrifugal Fan with EC Motor Installation and Operating Instructions • 3 speed continuous running • SAP Appendix Q Eligible • 3 models: - standard - timer - humidity control • for all domestic wet rooms • for walls or ceilings...
- Page 2 "Elix 1003” - CENTRIFUGAL FANS WITH EC MOTOR INSTALLATION and OPERATING INSTRUCTIONS THIS LEAFLET MUST BE AVAILABLE TO THE USER The product you have purchased is an extractor fan - do not touch it with wet or damp parts of the for exhausting directly outside or through longer body (e.g hands, feet).
- Page 3 WARNING: Damage could be caused to the product • The product must not exhaust into ducts if the installation instructions are not followed. designed to evacuate fumes from combustion • The product should not be used in an ambient in stoves or other combustion-powered devices. temperature higher than 40°C (104°F).
- Page 4 (speed 2) will start to operate Data Logger, please refer to separate Data Logger automatically when the relative humidity (adjustable instructions enclosed. (Contact Vectaire Ltd for any between 40% and 90% +/-5% tolerance) reaches further clarification.)
- Page 5 INSTALLATION...
- Page 6 INSTALLATION...
- Page 7 INSTALLATION ELXs - 3 Speed with Cord ELXs - 3 Speed via remote switch N.B When installing fans via a remote switch, pullcord switch must be left in "off" position and the cord removed.
- Page 8 JUMPER SWITCH These fans are designed to run continuously at one of 2 lower speeds fixed at installation using the jumper switch. ELX1003 ELX1003 Minimum Speed Speed 2 Jumper 1 Jumper 2 ELX1003DT ELX1003DT ELX1003HDT ELX1003HDT Speed 2 Minimum Speed Jumpers 2 and 3.
- Page 9 MAINTENANCE Before any maintenance or cleaning operation, switch off the fan and disconnect it from the main power supply. The filter can be easily removed and carefully washed. The front cover can be cleaned with a dry cloth or soft brush. The fan must not come into contact with any kind of liquid or solvent. If this should occur, contact a qualified technician before reassembling the fan.
- Page 10 High Wycombe Buckinghamshire HP12 3RH Tel: +44(0)1494 522333 Fax: +44(0)1494 522337 Email: sales@vectaire.co.uk Web: www.vectaire.co.uk Elix 1003 190717 E & O.E Vectaire Ltd reserves the right to alter specifications as part of its policy of continuous development Cod. 5F12245: Rev.1...