Solid-State Drive; Removing The M.2 2230 Pcie Solid-State Drive - Dell OptiPlex 3090 Micro Service Manual

Steps
1. Insert the hard-drive assembly into the slot on the system.
2. Slide the hard-drive assembly towards the connector in the system board until the release tabs clicks into place.
Next steps
1. Install the side cover.
2. Follow the procedure in

Solid-state drive

Removing the M.2 2230 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the hard-drive
22 Removing and installing components
after working inside your
before working inside your
assembly.
computer.
computer.