Steps
1. Place the hard-drive into the bracket.
2. Align and insert the pins on the drive bracket with the slots on the drive.
NOTE:
Note the orientation of the hard-drive so that you can replace it correctly.
Next steps
1. Install the
2.5 in. hard-drive
2. Install the
side
cover.
3. Follow the procedure in
Installing the 2.5 in. hard-drive assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the hard-drive assembly and provides a visual representation of the installation
procedure.
assembly.
after working inside your
computer.
Removing and installing components
21