Fan Assembly; Removing The Fan Assembly - Dell OptiPlex 3090 Micro Service Manual

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector on the system board.
2. Insert the solid-state drive at a 45-degree angle into the solid-state drive connector.
3. Replace the screw (M2x3.5) that secures the M.2 2280 PCIe solid-state drive to the system board.
Next steps
1. Install the hard-drive assembly.
2. Install the side cover.
3. Follow the procedure in

Fan assembly

Removing the fan assembly

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the fan assembly and provide a visual representation of the removal procedure.
26 Removing and installing components
after working inside your
before working inside your
computer.
computer.