Running In The Engine; Preparing The Vehicle For Difficult Operating Conditions - Husqvarna TC 125 2022 Owner's Manual

Table of Contents

7 PREPARING FOR USE

–

Adjust the basic position of the hand brake lever. (

–

Adjust the basic position of the foot brake lever.

–

Set the basic position of the shift lever.

–

Get used to the handling characteristics of the motorcycle on a suitable surface before undertaking more

challenging trips.

–

Try also to ride as slowly as possible and in a standing position to get a better feel for the motorcycle.

–

Do not make any off-road trips that exceed your ability and experience.

–

Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.

–

Do not take luggage along.

–

Do not exceed the maximum permissible weight and the maximum permissible axle loads.

Guideline

Maximum permissible overall weight

Maximum permissible front axle load

Maximum permissible rear axle load

–

Check the spoke tension. (

–

Run in the engine. (

7.2

–

During the running-in phase, do not exceed the specified engine performance.

Guideline

Maximum engine performance

–

Avoid fully opening the throttle!

7.3

–

Clean the air filter and air filter box.

–

Check the electrical connector for humidity and corrosion and to ensure it is firmly seated.

Info

Your motorcycle is not approved for use on public roads.

When off road, it is recommended that you are accompanied by another person on another vehicle

so that you can help each other.

p. 94)

Info

The spoke tension must be checked after half an hour of operation.

p. 22)