Table of Contents
Advertisement
Quick Links
Pandora Mini Moto is a service-security system built for motorcycles and quads with on-board
voltage of 12V.
It is a complex engineering device, which includes unique and modern technological software and
hardware solutions. While developing we were using the most up-to-date electronics from world's
best manufacturers. The device is built using high-precision mounting and control machinery; thus,
we guarantee highest possible quality, reliability and stable technical characteristics for the whole
operation period.
The system is built for your convenience: it's ergonomic, reliable, has the highest security and service
characteristics, 3 years unconditional warranty and free service and support. We are happy to provide
any support we can – feel free to use our online support.
!
WARNING! I
t Is stRoNGly RecommeNded to hAve A pRofessIoNAl cAR mechANIc to INstAll the system
cAR electRoNIcs INstAlleR should be Able to INstAll the system usING INstAllAtIoN scheme IN thIs mANuAl
A
s
ANd the
lARm
tudIo oR
. o
INstAllAtIoN
uR systems ARe thoRouGhly tested foR quAlIty
most lIkely the pRoblem Is IN ImpRopeR INstAllAtIoN
This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter.
The base unit is designed to operate at temperatures from -40°C to +85°, the degree of protection is IP54.
The control units (remotes, tags, etc.) are designed to operate at temperatures from -10°C to +40°C, the degree of protection is IP40.
See wiring diagram to find information about additional devices and options.
Our web-site: pandorainfo.com
Customer support: support@pandorainfo.com
p
s
ANdoRA
pecIAlIst softWARe
Pandora would like to thank you
for choosing our service-security system
for motorcycles Pandora Mini Moto
. m
ost feAtuRes ARe hIGhly depeNdeNt oN competeNt
,
so If A feAtuRe fAIls to pRoduce expected Result
.
Product is in conformity with Electromagnetic Compatibility
Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC
. A
Ny
,
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pandora Mini Moto
Summary of Contents for Pandora Mini Moto
- Page 1 Pandora Mini Moto Pandora Mini Moto is a service-security system built for motorcycles and quads with on-board voltage of 12V. It is a complex engineering device, which includes unique and modern technological software and hardware solutions.
-
Page 2: Table Of Contents
Emergency disarming Emergency control of the anti-theft functions System functions and modes Programming the system Security mode Security zones Pandora Specialist Application Owner authorization devices and functions Pandora Alarm Studio Checking the number of paired devices Updating firmware Programming table... -
Page 3: General Information
GENERAL INFORMATION Read before using System set Carefully read this manual before starting installation and using the security-service system. Pay attention to the text marked with 1. User and installation manual 2. Owner’s personal card 3. Immobiliser tag BT-780 hE sEcuriTy sErvicE sysTEm is a cOmplEx TEchNical prOducT ysTEm iNsTallaTiON aNd cONfiguraTiON musT bE carriEd 4. -
Page 4: Pin-Codes Of The System
System allows to change default sensor’s settings, use the information from the temperature sensor of the DMS-100 BT, program automatic engine start and stop. Built-in micro-USB port – update and configuration of the system using the Pandora Specialist mobile app or Alarm Studio program. -
Page 5: Information Signals Of The System
Information signals of the system EXTERNAL BUTTON LED INDICATOR SIGNALS SOUND / LIGHT SIGNALIZATION SIGNALS DESCRIPTION SIGNALS DESCRIPTION (sound / light) THE SYSTEM IS ARMED Arming 1х /1х Short red flashes System is armed Short green flashes System is armed (authorization devices are in the coverage zone) Disarming 2х... -
Page 6: System Functions And Modes
SYSTEM FUNCTIONS AND MODES Security zones Security mode • Outside temperature (status) • Engine temperature (status)* The system confirms arming with 1х sound 1х light signals. When the system is armed, • Voltage of the on-board circuits (status) the system monitors security zones with separated warning and alarm level of triggering: •... -
Page 7: Checking The Number Of Paired Devices
Checking the number of paired devices Immobiliser mode This mode is used to recognize an owner using authorization devices when the system is disarmed. When turning on the ignition, the base unit performs a search for authorization devices in the radio The number of paired radio tags/mobile devices can be checked by the number of flashes of the LED coverage zone. -
Page 8: Immobiliser Radio Tag
IMMOBILISER RADIO TAG Indication of the SEND LED A radio tag is a device used to control a vehicle/system on a distance of a Bluetooth connection. The SIGNALS DESCRIPTION tag is also used as an authorization device for «Immobiliser/Anti-Hi-Jack/Hands Free» modes. The radio tag has: a control button for arming/disarming and activating/deactivating Service mode;... -
Page 9: Updating Firmware Of The Tag
MOBILE APPLICATION Updating firmware of the tag • Download the Pandora BT application (Android / iOS) or Pandora Specialist (Android) on the devices Pandora Connect is a mobile application to control the system, receive status information and use equipped with a Bluetooth 4.0 Low Energy or higher module. -
Page 10: System Installation
SYSTEM INSTALLATION Controlled and security zones General installation requirements VEHICLE/SYSTEM ZONES CONTROLLED ZONES SECURITY ZONES • Install the base unit in secured place with difficult access. External temperature • Install securely each system’s component, as conditions of the vehicles standard operation can harm functionality of the alarm system and cause damage to the vehicle original systems, including the Engine temperature elements of safety in motion. - Page 11 • Wire №9 | Orange | 6A (+12V) | CH7 — default logic is «Turn indicators». Connect this wire to (+) This connector is used to configure and update the system with Pandora Alarm Studio or Pandora control wire of the left or right turn indicators. The wire is equipped with a 7.5A fuse.
-
Page 12: Wiring Diagram
Pandora MINI MOTO BASE UNIT WIRING DIAGRAM PLACEMENT WARNING! Update rmware of the WARNING! Fixate the protective cap WARNING! The system is a IT IS FORBIDDEN to install the system IS FORBIDDEN to change or bypass original base unit before installation. If the using clamps when the installation is maintenance-free device. -
Page 13: Control The System
HANDS FREE on the tag. MOBILE APP Mobile app Pandora Connect – When the system is online (Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded. The icon of the current system mode Clutch lever –... -
Page 14: Season Storage Mode
Activated Service mode is indicated by icon , it will disappear after deactivation. Mobile app Pandora Connect – When the system is online (Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded. «c... -
Page 15: Control Over The System In Case Of Emergency
• Enter the second digit • Press the button the number of times equal to the second digit. Pauses PANDORA EYE PRO / NAV-X TELEMETRY MODULE between presses should not exceed 1 second. Each pressing will be confirmed with an orange LED Call the telemetry module phone number and enter the command after the answer. -
Page 16: Programming The System
This section describes two options to deactivate Immobiliser modes: • Immobiliser and Anti-hi-Jack - use owner authorization devices (tags, remotes, watches, bands) for System settings and parameters can be configured using the Pandora Alarm Studio and Pandora engine blocking; Specialist application. Some functions can be configured only by the programming menu of the system. -
Page 17: Pandora Specialist Application
• Connect the system to the PC via a USB cable; • Put the system to the programming mode; • The Pandora Alarm Studio will automatically connect to the system and you will be able to configure settings and update firmware. -
Page 18: Programming Table
Pauses between presses should not exceed 1 second, every pressing will confirm with an orange LED indicator flash. Pause for more than 1 second and a red LED indicator flash with a 10.8 – Pairing a telemetry module Pandora Eye Pro / NAV-X H1P8 sound from the Siren confirm the input of the first digit. - Page 19 The LED will light red after entering. Press and hold the VALET button for 5 programming level №0. seconds until 6 orange flashes of LED indicator or 5 sound signals of the Siren. Open the Pandora Specialist or Pandora BT app, go to «Search device» screen and select the device and then select one...
-
Page 20: Additional Devices
ADDITIONAL DEVICES Level №11 – Programming and configuring an «Immobiliser PIN-code» The level is divided into 3 sublevels Selecting buttons Remote control D-035 – is a two-way short-distance communication The system will automatically enter the sublevel 11.0 (Selecting buttons) after entering the level device designed to control a security system and receive information 11. -
Page 21: Warranty Obligations
* pandora-on.com internet service; • if exploitation, installation, storage or transportation conditions were not met; * Pandora Connect - the mobile app for smartphones (Android and • if there is mechanical damage of the external parts of the system after it is sold. -
Page 22: Installation Certificate
Car specifications: Car model Type Id number (VIN) Registration number Security system specification: Model Pandora Mini Moto Serial number Service center name, full address and installer’s stamp Signature_____________________/___________________________________/ Signatory Work accepted________________/___________________________________/ Signatory Date «____»___________________20____y. -
Page 23: Acceptance Certificate
Acceptance certificate Pandora Mini Moto Model is in conformity with Electromagnetic Compatibility Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC. Serial number ______________________________ Date of production__________________________ Responsible person’s signature (stamp) Packager_____________________________________________________________________________ Signature (personal stamp) Warranty card Pandora Mini Moto Model Serial number _________________________________________________________________________ Date of purchase «____»...
Need help?
Do you have a question about the Mini Moto and is the answer not in the manual?
Questions and answers