Table of Contents
Advertisement
Quick Links
Pandora Mini Moto is a service-security system built for motorcycles and quads with on-board
voltage of 12V.
It is a complex engineering device, which includes unique and modern technological software and
hardware solutions. While developing we were using the most up-to-date electronics from world's
best manufacturers. The device is built using high-precision mounting and control machinery; thus,
we guarantee highest possible quality, reliability and stable technical characteristics for the whole
operation period.
The system is built for your convenience: it's ergonomic, reliable, has the highest security and service
characteristics, 3 years unconditional warranty and free service and support. We are happy to provide
any support we can – feel free to use our online support.
!
WARNING! I
t Is stRoNGly RecommeNded to hAve A pRofessIoNAl cAR mechANIc to INstAll the system
cAR electRoNIcs INstAlleR should be Able to INstAll the system usING INstAllAtIoN scheme IN thIs mANuAl
A
s
ANd the
lARm
tudIo oR
. o
INstAllAtIoN
uR systems ARe thoRouGhly tested foR quAlIty
most lIkely the pRoblem Is IN ImpRopeR INstAllAtIoN
This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter.
The base unit is designed to operate at temperatures from -40°C to +85°, the degree of protection is IP54.
The control units (remotes, tags, etc.) are designed to operate at temperatures from -10°C to +40°C, the degree of protection is IP40.
See wiring diagram to find information about additional devices and options.
Our web-site: pandorainfo.com
Customer support: support@pandorainfo.com
p
s
ANdoRA
pecIAlIst softWARe
Pandora would like to thank you
for choosing our service-security system
for motorcycles Pandora Mini Moto
. m
ost feAtuRes ARe hIGhly depeNdeNt oN competeNt
,
so If A feAtuRe fAIls to pRoduce expected Result
.
Product is in conformity with Electromagnetic Compatibility
Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC
. A
Ny
,
Advertisement
Table of Contents
Related Manuals for Pandora MINI MOTO
Summary of Contents for Pandora MINI MOTO
- Page 1 Pandora Mini Moto Pandora Mini Moto is a service-security system built for motorcycles and quads with on-board voltage of 12V. It is a complex engineering device, which includes unique and modern technological software and hardware solutions.
-
Page 2: Table Of Contents
Table of contents General information System set Read before using PIN-codes of the system System modules layout Owner’s personal card External VALET button Base unit Information signals of the system System functions and modes Security mode Security zones Owner authorization devices and functions Checking the number of paired devices Immobiliser radio tag Functions of the button... - Page 3 Season storage mode Service mode Control over the system in case of emergency Emergency disarming Emergency control of the anti-theft functions Programming the system Pandora Specialist Application Pandora Alarm Studio Updating firmware Programming table Additional devices Warranty obligations Installation certificate...
-
Page 4: General Information
GENERAL INFORMATION System set 1. User and installation manual 2. Owner’s personal card 3. Immobiliser tag BT-780 4. External VALET button 5. Base unit with the main cable 6. Blocking relay 7. Magnetic reed sensor 8. Packaging 9. External temperature sensor NOTE! T hE maNufacTurEr rEsErvEs ThE righT TO chaNgE ThE sysTEm sET aNd cONsTrucTiON Of ThE prOducT TO imprOvE ’... -
Page 5: Read Before Using
Read before using Carefully read this manual before starting installation and using the security-service system. Pay attention to the text marked with hE sEcuriTy sErvicE sysTEm is a cOmplEx TEchNical prOducT ysTEm iNsTallaTiON aNd cONfiguraTiON musT bE carriEd OuT ONly by a skillEd prOfEssiONal ’... -
Page 6: Pin-Codes Of The System
PIN-codes of the system The «Secret PIN-code» CANNOT BE CHANGED (is written on the «Owner’s personal card») The «Service PIN-code» (default value is 1-1-1-1) The «Immobiliser PIN-code» (is used for the Code Immobiliser (pin-to-drive) function) piN- T is rEcOmmENdEd ThaT yOu will wriTE dOwN ThE chaNgEd Or crEaTEd valuEs Of all cOdEs limiNaTE Third parTy... -
Page 7: Owner's Personal Card
System allows to change default sensor’s settings, use the information from the temperature sensor of the DMS-100 BT, program automatic engine start and stop. Built-in micro-USB port – update and configuration of the system using the Pandora Specialist mobile app or Alarm Studio program. -
Page 8: Information Signals Of The System
Information signals of the system SOUND / LIGHT SIGNALIZATION SIGNALS DESCRIPTION (sound / light) Arming 1х /1х Disarming 2х /2х 1х Activating Service mode* Correct input of the «Immobiliser PIN-code»* Deactivating Service mode* 2х 3х (3 times) A battery in a radio tag is discharged (when turning on the ignition)* Absence of the authorization device (when turning on the ignition)* 4х... - Page 9 EXTERNAL BUTTON LED INDICATOR SIGNALS SIGNALS DESCRIPTION THE SYSTEM IS ARMED Short red flashes System is armed Short green flashes System is armed (authorization devices are in the coverage zone) Fast red flashes Alarm THE SYSTEM IS DISARMED Faded System is disarmed System is preparing for the automatic or delayed arming Green (when turning System is in Service mode...
-
Page 10: System Functions And Modes
SYSTEM FUNCTIONS AND MODES Security mode The system confirms arming with 1х sound 1х light signals. When the system is armed, the system monitors security zones with separated warning and alarm level of triggering: • Warning mode - this mode activates when there is a slight impact on the shock sensor or additional senor. -
Page 11: Security Zones
Security zones • Outside temperature (status) • Engine temperature (status)* • Voltage of the on-board circuits (status) • Additional sensor (security zone - alarm and warning level)* • Shock sensor (security zone – alarm and warning level) • Tilt sensor (security zone – alarm level) •... - Page 12 Immobiliser mode This mode is used to recognize an owner using authorization devices when the system is disarmed. When turning on the ignition, the base unit performs a search for authorization devices in the radio coverage zone. If there is no any authorization device in the radio coverage zone, the system will block the engine.
-
Page 13: Checking The Number Of Paired Devices
Checking the number of paired devices The number of paired radio tags/mobile devices can be checked by the number of flashes of the LED indicator. The number of remotes/tags/mobile device can be checked when switching on the ignition (system must be disarmed). The number of orange flashes will indicate the number of paired remotes/ bands/watches, the number of green flashes will indicate the number of paired radio tags, a following red flash will indicate a paired mobile device. -
Page 14: Immobiliser Radio Tag
IMMOBILISER RADIO TAG A radio tag is a device used to control a vehicle/system on a distance of a Bluetooth connection. The tag is also used as an authorization device for «Immobiliser/Anti-Hi-Jack/Hands Free» modes. The radio tag has: a control button for arming/disarming and activating/deactivating Service mode;... -
Page 15: Indication Of The Send Led
Indication of the SEND LED SIGNALS DESCRIPTION one flash Arm/disarm Confirmation of arming Low battery level (when installing a battery) two flashes Confirmation of disarming three flashes High battery level (when installing a battery) faded Battery is discharged constant light (when installing a battery, when the button is pressed) Installation/replacing a battery of the tag CR2032 To install or replace the battery (CR2032), carefully follow these steps:... -
Page 16: Updating Firmware Of The Tag
Updating firmware of the tag • Download the Pandora BT application (Android / iOS) or Pandora Specialist (Android) on the devices equipped with a Bluetooth 4.0 Low Energy or higher module. • Open the mobile app, find the system. «SEND»... -
Page 17: Mobile Application
MOBILE APPLICATION Pandora Connect is a mobile application to control the system, receive status information and use the mobile phone as an authorization device on a distance of a Bluetooth connection. The mobile phone must be paired with the system. - Page 18 Controlled and security zones VEHICLE/SYSTEM ZONES CONTROLLED ZONES SECURITY ZONES External temperature Engine temperature On-board voltage Shock sensor (alarm) Shock sensor (warning) Tilt sensor (alarm) Motion sensor (alarm) Ignition (alarm) Brake (alarm) Clutch (alarm) Trunk (alarm) Additional sensor (alarm) Additional sensor (warning) PA N D O R A M I N I M OTO...
-
Page 19: System Installation
SYSTEM INSTALLATION General installation requirements • Install the base unit in secured place with difficult access. • Install securely each system’s component, as conditions of the vehicles standard operation can harm functionality of the alarm system and cause damage to the vehicle original systems, including the elements of safety in motion. -
Page 20: Base Unit Connectors Description
Micro-USB connector This connector is used to configure and update the system with Pandora Alarm Studio or Pandora Specialist App. Main cable The main cable contains low-current programmable channels: inputs «INP» and outputs «CH» with a preset logic. Changing the preset logic is available in the system settings «Inputs and outputs» or «Time channels»... - Page 21 • Wire №16 | Orange/black | CAN-H — digital bus «CAN-High». It is connected to the corresponding CAN-High wire of the vehicle. Before connecting the digital bus, you must select the vehicle model (model code). Information available on www.loader.pandorainfo.com and in the Pandora Specialist App and Pandora Alarm Studio.
- Page 22 IP54. WARNING! The base unit must be placed Black vertically or horizontally, do not cover the front side of the unit (the side with White the «Pandora» sign). White/Red Yellow Green WARNING! Do not shield the built-in antenna when...
-
Page 23: Wiring Diagram
Pandora MINI MOTO WIRING DIAGRAM WARNING! The system is a IT IS FORBIDDEN to install the system IS FORBIDDEN to change or bypass original maintenance-free device. In case of on a vehicle with normal voltage other fuses of a system in the installation process. -
Page 24: Control The System
Radio tag – A radio tag must be in the Bluetooth coverage area. Shortly press the control button on the tag. Mobile app Pandora Connect – When the system is online (Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded. The icon of the current system mode will be changed HandsFree mode –... -
Page 25: Panic Mode
Radio tag – A radio tag must be in the Bluetooth coverage area. Shortly press the control button on the tag. Mobile app Pandora Connect – When the system is online (Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded. The icon of the current system mode will be changed HandsFree mode –... -
Page 26: Season Storage Mode
15 minutes; - if the system is disarmed, the ignition must be switched on. Mobile app Pandora Connect – When the system is online (Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded. - Page 27 LED. The device must be in the Bluetooth coverage area. Pandora Connect – To activate/deactivate service mode, open the mobile application. When the system is online (Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded.
-
Page 28: Control Over The System In Case Of Emergency
ON ThE dashbOard THE SYSTEM CAN BE CONTROLLED FROM A PHONE WITH AN OPTIONAL PANDORA EYE PRO / NAV-X TELEMETRY MODULE Call the telemetry module phone number and enter the command after the answer. If the call is made from a number which is not saved in memory, then after the sound signal you will need to enter the «Guest PIN-code»:... -
Page 29: Emergency Disarming
READ THE PROCEDURE FOR ENTERING THE PIN-CODE BEFORE USING EMERGENCY FUNCTIONS. • Enter the first digit • Press the button the number of times equal to the first digit. Pauses between presses should not exceed 1 second. Each pressing will be confirmed with an orange LED indicator flash. -
Page 30: Emergency Control Of The Anti-Theft Functions
Emergency control of the Code Immobiliser This section describes two options to deactivate Immobiliser modes: • Immobiliser and Anti-hi-Jack - use owner authorization devices (tags, remotes, watches, bands) for engine blocking; • Code Immobiliser - uses standard vehicle controls (buttons, levers, pedals) to enter the Immobiliser PIN-code. -
Page 31: Programming The System
PROGRAMMING THE SYSTEM System settings and parameters can be configured using the Pandora Alarm Studio and Pandora Specialist application. Some functions can be configured only by the programming menu of the system. It is required to put the system to programming mode to get access to the settings. -
Page 32: Pandora Specialist Application
• Connect the system to the PC via a USB cable; • Put the system to the programming mode; • The Pandora Alarm Studio will automatically connect to the system and you will be able to configure settings and update firmware. -
Page 33: Updating Firmware
Updating firmware It is recommended to update firmware of the base unit before installing and programming the system. Pandora Specialist Pandora Alarm Studio • Open the «Check firmware» menu and select • Open the «Update Software» window and one of the update options («Download select one of the update options («Load from... -
Page 34: Programming Table
10.6 – Pairing an additional device RHM-03BT / PS-331BT / PS-332BT H1P6 10.7 – Pairing an additional device H1P7 10.8 – Pairing a telemetry module Pandora Eye Pro / NAV-X H1P8 10.9 – Pairing a GPS-receiver NAV-035 BT H1P9 10.11 – Pairing an RF module RFM-470 H1P11... - Page 35 Level №0 – Entering a level Enter programming mode, enter the «Service PIN-code» (default value is 1-1-1-1) using an external VALET button or the VALET button located on the base unit. After entering programming mode, the system waits for level input – «Level 0 Entering a level». Enter a desired level using the VALET button (see the programming table) to change settings or parameters: •...
- Page 36 Level №4 – Reset to the factory settings The procedure recovers the factory settings of the system without deleting previously registered devices (tags, mobile device, relays, etc.) that is stored in the non-volatile memory. Enter the programming level №4: • Press and hold the VALET button for more than 4 seconds. Release the button after a sound of the Siren.
- Page 37 The LED will light red after entering. Press and hold the VALET button for 5 seconds until 6 orange flashes of LED indicator or 5 sound signals of the Siren. Open the Pandora Specialist or Pandora BT app, go to «Search device» screen and select the device and then select one of the update option: •...
- Page 38 Level №11 – Programming and configuring an «Immobiliser PIN-code» The level is divided into 3 sublevels Selecting buttons The system will automatically enter the sublevel 11.0 (Selecting buttons) after entering the level 11. The system will wait for buttons pressing. Each pressing will be confirmed with an orange flash of the LED.
-
Page 39: Additional Devices
ADDITIONAL DEVICES Remote control D-035 – is a two-way short-distance communication device designed to control a security system and receive information about its state. The remote control can be used as an owner authorization device. CONTROL COMMANDS Arming/Disarming | Service mode STATUSES Vehicle and system statuses OWNER AUTHORIZATION... - Page 40 NAV-X is an additional module to provide telemetry and service functions: * pandora-on.com internet service; * Pandora Connect - the mobile app for smartphones (Android and iOS) * GSM connection. CONTROL COMMANDS Arming/Disarming | Service mode | Blocking...
-
Page 41: Warranty Obligations
WARRANTY OBLIGATIONS Manufacturer guarantees correct operation of the service-security system if exploitation, installation, storage and transportation conditions described in this manual were met. The system should only be used according to installation scheme and user manuals. The system is meant to be installed by the professional car electronics installers. The installer should fill in installation certificate that is included in this manual. - Page 42 PA N D O R A M I N I M OTO...
-
Page 43: Installation Certificate
Car specifications: Car model Type Id number (VIN) Registration number Security system specification: Model Pandora Mini Moto Serial number Service center name, full address and installer’s stamp Signature_____________________/___________________________________/ Signatory Work accepted________________/___________________________________/ Signatory Date «____»___________________20____y. -
Page 44: Acceptance Certificate
Acceptance certificate Pandora Mini Moto Model is in conformity with Electromagnetic Compatibility Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC. Serial number ______________________________ Date of production__________________________ Responsible person’s signature (stamp) Packager_____________________________________________________________________________ Signature (personal stamp) Warranty card Pandora Mini Moto Model Serial number _________________________________________________________________________ Date of purchase «____»...