Table of Contents
Advertisement
Quick Links
Pandora Smart Moto / Smart Moto Plus
quads with on-board voltage of 12V.
It is a complex engineering device, which includes unique and modern technological software and
hardware solutions. While developing we were using the most up-to-date electronics from world's
best manufacturers. The device is built using high-precision mounting and control machinery; thus,
we guarantee highest possible quality, reliability and stable technical characteristics for the whole
operation period.
The system is built for your convenience: it's ergonomic, reliable, has the highest security and service
characteristics, 3 years unconditional warranty and free service and support. We are happy to provide
any support we can – feel free to use our online support.
!
WARNING! I
T IS STRONGLY RECOMME NDED TO HAVE A PROFESS IONAL CAR MECH ANI C TO INSTALL THE SYSTEM
CAR ELECT RONICS INSTALLE R SHOULD BE ABLE TO INSTALL THE SYSTEM USING INSTALLATION SCHEME IN THIS MANUAL
A
S
AND THE
LARM
TUD IO OR
. O
INSTALLATION
UR SYSTEMS ARE THO ROUGHLY TESTED FOR QUALITY
MOST LIKELY THE PROBLEM IS IN IMPROPE R INSTALLATION
This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter.
The base unit is designed to operate at temperatures from -40°C to +85°, the degree of protection is IP54.
The control units (remotes, tags, etc.) are designed to operate at temperatures from -10°C to +40°C, the degree of protection is IP40.
See wiring diagram to nd information about additional devices and options.
Our web-site: pandorainfo.com
Customer support: support@pandorainfo.com
for motorcycles Pandora Smart Moto/Smart Moto Plus
P
S
ANDORA
PEC IALIST SOFT WAR E
Pandora would like to thank you
for choosing our service-security system
is a service-security system built for motorcycles and
. M
OST FEATURES ARE HIGHLY DEPE NDENT ON COMPETE NT
,
SO IF A FEATURE FAILS TO PRODUCE EXPECTED RESULT
.
Product is in conformity with Electromagnetic Compatibility
Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC
. A
NY
,
Advertisement
Table of Contents
Related Manuals for Pandora Smart Moto
Summary of Contents for Pandora Smart Moto
- Page 1 Pandora would like to thank you for choosing our service-security system for motorcycles Pandora Smart Moto/Smart Moto Plus Pandora Smart Moto / Smart Moto Plus is a service-security system built for motorcycles and quads with on-board voltage of 12V. It is a complex engineering device, which includes unique and modern technological software and hardware solutions.
-
Page 2: Table Of Contents
Functions of the button Indication of the SEND LED Installation/replacing a battery of the tag Prompt entry/change of the main owner phone number Updating rmware of the tag Wrist bracelet PANDORA BAND Switching on/o the Band Charging the Band Button’s functions Firmware update... - Page 3 Season storage mode Service mode Control over the system in case of emergency Emergency disarming Emergency control of the anti-theft functions Programming the system Pandora Specialist Application Pandora Alarm Studio Updating rmware Programming table Additional devices Warranty obligations Installation certi cate...
-
Page 4: General Information
GENERAL INFORMATION System set Pandora Smart Moto and Pandora Smart Moto Plus 1. User and installation manual 2. Owner’s personal card 3. Immobiliser tag BT-780 4. External VALET button 5. Base unit with the main cable 6. Blocking relay 7. Magnetic reed sensor 8. -
Page 5: Read Before Using
Read before using Carefully read this manual before starting installation and using the security-service system. Pay attention to the text marked with HE SECURITY SERVICE SYSTEM IS A COMPLEX TECHNICAL PRODUCT YSTEM INSTALLATION AND CONFIGURATION MUST BE CARRIED OUT ONLY BY A SKILLED PROFESSIONAL ’... -
Page 6: Pin-Codes Of The System
PIN-codes of the system The «Secret PIN-code» CANNOT BE CHANGED (is written on the «Owner’s personal card») The «Service PIN-code» (default value is 1-1-1-1) The «Guest PIN-code» (default value is 1-2-3-4) The «Immobiliser PIN-code» (is used for the Code Immobiliser (pin-to-drive) function) PIN- T IS RECOMMENDED THAT YOU WILL WRITE DOWN THE CHANGED OR CREATED VALUES OF ALL CODES... -
Page 7: Owner's Personal Card
Owner’s personal card RASE THE PROTECTIVE LAYER CAREFULLY O NOT USE ANY SHARP OBJECTS TO AVOID DAMAGING OF A HIDDEN INFORMATION UNDER THE PROTECTIVE LAYER ’ HE INFORMATION ON THE OWNER S PERSONAL CARD COULD NOT BE CHANGED LOGIN PASS OR RESTORED IN CASE OF DAMAGE OR LOSE LIMINATE THIRD PARTY ACCESS TO... -
Page 8: Base Unit
Built-in LTE module (4G LTE/3G/2G | GPS/GLONASS) – provides a connection with our online- service pandora-on.com and mobile applications), allows to control the system by a phone using DTMF- commands, voice and SMS noti cations, LBS-coordinates (only by DTMF–command), automatic date and time detection, precise GPS location (with Tracking function). -
Page 9: Information Signals Of The System
Information signals of the system SOUND / LIGHT SIGNALIZATION SIGNALS DESCRIPTION (sound / light) Arming Disarming Activating Service mode* Correct input of the «Immobiliser PIN-code»* Deactivating Service mode* A battery in a radio tag is discharged (when turning on the ignition)* (3 times) Absence of the authorization device (when turning on the ignition)* (4 times) - Page 10 EXTERNAL BUTTON LED INDICATOR SIGNALS SIGNALS DESCRIPTION THE SYSTEM IS ARMED System is armed System is armed (authorization devices are in the coverage zone) Alarm THE SYSTEM IS DISARMED Faded System is disarmed System is preparing for the automatic or delayed arming Green (when turning System is in Service mode on the ignition)
-
Page 11: System Functions And Modes
SYSTEM FUNCTIONS AND MODES Security mode The system con rms arming with sound light signals. When the system is armed, the system monitors security zones with separated warning and alarm level of triggering: • Warning mode - this mode activates when there is a slight impact on the shock sensor or additional senor. -
Page 12: Security Zones
Security zones • Outside temperature (status) • Engine temperature (status) • Voltage of the on-board circuits (status) • Additional sensor (security zone - alarm and warning level)* • Shock sensor (security zone – alarm and warning level) • Tilt sensor (security zone – alarm level) •... - Page 13 Immobiliser mode This mode is used to recognize an owner using authorization devices when the system is disarmed. When turning on the ignition, the base unit performs a search for authorization devices in the radio coverage zone. If there is no any authorization device in the radio coverage zone, the system will block the engine.
-
Page 14: Checking The Number Of Paired Devices
Checking the number of paired devices The number of paired radio tags/mobile devices can be checked by the number of ashes of the LED indicator. The number of remotes/tags/mobile device can be checked when switching on the ignition (system must be disarmed). The number of orange ashes will indicate the number of paired remotes/ bands/watches, the number of green ashes will indicate the number of paired radio tags, a following red ash will indicate a paired mobile device. -
Page 15: Immobiliser Radio Tag
IMMOBILISER RADIO TAG A radio tag is a device used to control a vehicle/system on a distance of a Bluetooth connection. The tag is also used as an authorization device for «Immobiliser/Anti-Hi-Jack/Hands Free» modes. The radio tag has: a control button for arming/disarming and activating/deactivating Service mode;... -
Page 16: Indication Of The Send Led
Indication of the SEND LED SIGNALS DESCRIPTION Arm/disarm Low battery level (when installing a battery) High battery level (when installing a battery) faded Battery is discharged constant light (when installing a battery, when the button is pressed) Installation/replacing a battery of the tag CR2032 To install or replace the battery (CR2032), carefully follow these steps: 1. -
Page 17: Prompt Entry/Change Of The Main Owner Phone Number
HE PHONE NUMBER COULD BE ALSO CHANGE USING MOBILE DEVICE HANGING SETTINGS VIA PHONE SECTION • Download the Pandora BT application (Android / iOS) or Pandora Specialist (Android) on the devices equipped with a Bluetooth 4.0 Low Energy or higher module. • Open the mobile app, nd the system. -
Page 18: Wrist Bracelet Pandora Band
AND IS INCLUDED IN THE ANDORA MART LUS SET Wrist-wearable band designed to conveniently control vehicle equipped with Pandora Bluetooth system • Display: OLED, 128 32 mm • Interface: Bluetooth 5.0 • Sensors: accelerometer • Accu: Li-Po, 85 mAh • Charging input: micro-USB •... -
Page 19: Button's Functions
- 0:00 COUNTER IS RESET BY TIME Firmware update Install Pandora BT (Android/iOS) or Pandora Specialist Apps on a smartphone or a tablet, equipped with Bluetooth 4.0 or higher. • open mobile app, search for a device; • press and hold control button for 10 sec or connect micro-USB cable while holding control button;... -
Page 20: Information Icons
Information icons Connection state Tilt sensor (alarm level) Security system status Motion sensor (alarm level) Charge indicator Ignition (alarm) 12 48 Current time Brake (alarm) Process scale Clutch (alarm) Counter Trunk Low voltage (alarm) Shock sensor Additional sensor (alarm level) (alarm level) Shock sensor Additional sensor... -
Page 21: Control The System By A Phone
CONTROL THE SYSTEM BY A PHONE OR THE CORRECT OPERATION OF THE FUNCTIONS AN OWNER SHOULD MONITOR THE STATUS BALANCE OF THE CARD , GSM INSTALLED IN THE SYSTEM F THE CARD IS BLOCKED OR DEFECTIVE FUNCTIONS OF THE SYSTEM WILL BE UNAVAILABLE Call the system’s phone number, wait for the answer. - Page 22 2. Dial 500*. 3. The system will con rm: «Current coordinates are sent via text message» and will send text message with coordinates and a web link to a map to your phone. To end the session, hang up the phone. Request GSM balance 1.
-
Page 23: Changing Settings Via A Phone
Changing settings via a phone Owner number -> # Changing guest PIN-code Phone Additional number settings settings Additional owner number -> # Entering as guest Second additional owner Set threshold voltage for sending number -> # text message Account balance inquiry number -> # Settings of the warning level of the shock sensor sensitivity Sensor... - Page 24 An example of changing the owner main number: 1. Enter the setting menu via a phone according to the instruction above; 2. Dial DTMF command 1*(phone number settings) and 1*(owner main number); 3. Enter new owner number in the format *XXXXXXXXXXX # (the system recognizes «*» as «+»); 4.
-
Page 25: System Installation
SYSTEM INSTALLATION General installation requirements • Install the base unit in secured places with di cult access. • Install securely each system’s component, as conditions of the vehicles standard operation can harm functionality of the alarm system and cause damage to the vehicle original systems, including the elements of safety in motion. -
Page 26: Base Unit Connectors Description
Micro-USB connector This connector is used to con gure and update the system with Pandora Alarm Studio or Pandora Specialist App. Main cable The main cable contains low-current programmable channels: inputs «INP» and outputs «CH» with a preset logic. Changing the preset logic is available in the system settings «Inputs and outputs» or «Time channels»... - Page 27 — digital bus «CAN-High». It is connected to the corresponding CAN-High wire of the vehicle. Before connecting the digital bus, you must select the vehicle model (model code). Information available on www.loader.pandorainfo.com and in the Pandora Specialist App and Pandora Alarm Studio.
- Page 28 (the side with the front side of the unit (the side with White White the «Pandora» sign). the «Pandora» sign). Antenna Antenna White/Red White/Red...
-
Page 29: Wiring Diagram
Pandora SMART MOTO Pandora SMART MOTO WIRING DIAGRAM WIRING DIAGRAM WARNING! The system is a The system is a IT IS FORBIDDEN IT IS FORBIDDEN to install the system to install the system IS FORBIDDEN IS FORBIDDEN to change or bypass original to change or bypass original maintenance-free device. -
Page 30: Online Service And Mobile Application
(using your email and password created on the registration step) and add the system to your account (enter information from the «Owner’s personal card»). Web-service: https://pandora-on.com. The Pandora Connect mobile app is available for downloading from the corresponding app store: App Store for iOS devices; Google Play for Android devices. -
Page 31: Registration
Login After completing of the registration process, you can login to the online service via a computer’s web browser or via the mobile app Pandora Connect. Use your previously created data: Login - your e-mail; Password - previously created password. -
Page 32: Writing A Mobile Device To The System Memory
When approaching the vehicle or when Internet connection is missing a mobile phone with the mobile application Pandora Connect installed can work with the system via a Bluetooth connection. This type of connection allows you to control the system, receive status information and use your mobile phone as an authorization device. - Page 33 NOTIFICATIONS VEHICLE/SYSTEM ZONES CONTROLLED ZONES SECURITY ZONES voice push External temperature Engine temperature On-board voltage Shock sensor (alarm) Shock sensor (warning) Tilt sensor (alarm) Motion sensor (alarm) Ignition (alarm) Brake (alarm) Clutch (alarm) Trunk (alarm) Additional sensor (alarm) Additional sensor (warning) U S E R A N D I N S TA L L AT I O N M A N UA L...
-
Page 34: Control The System
Radio tag – A radio tag must be in the Bluetooth coverage area. Shortly press the control button on the tag. Pandora Band – the device must be in the Bluetooth coverage area. Shortly press the control button on the Band. -
Page 35: Disarming
Radio tag – A radio tag must be in the Bluetooth coverage area. Shortly press the control button on the tag. Pandora Band – the device must be in the Bluetooth coverage area. Shortly press the control button on the Band. -
Page 36: Panic Mode
30 seconds. To activate this mode, use one of the methods described below. Mobile app Pandora Connect – When the system is online (there is an Internet or Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded. -
Page 37: Season Storage Mode
- if the system is disarmed, the ignition must be switched on. Mobile app Pandora Connect – When the system is online (only Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded. - Page 38 3 seconds. The device must be in the Bluetooth coverage area. Pandora Connect – To activate/deactivate service mode, open the mobile application. When the system is online (there is an Internet or Bluetooth connection), press and hold the button on the control panel until the scale is fully loaded.
-
Page 39: Control Over The System In Case Of Emergency
CONTROL OVER THE SYSTEM IN CASE OF EMERGENCY EFORE USING EMERGENCY SYSTEM CONTROL CHECK THE SYSTEM AND VEHICLE CONTROL DEVICES CHECK A BATTERY TURN ON A DEVICE IN ACCORDANCE WITH ITS MANUAL IF REQUIRED F ALL DEVICES ARE WORKING TRY TO MAKE A PRIMARY VEHICLE DIAGNOSIS CHECK THE VEHICLE ORIGINAL CONTROL DEVICE VEHICLE BATTERY CHARGE LEVEL... - Page 40 Owner’s personal card External VALET button VALET EMOVE THE PROTECTIVE LAYER CAREFULLY O NOT HE EXTERNAL BUTTON IS PLACED IN THE INTERIOR «S ») USE ANY SHARP OBJECTS TO AVOID DAMAGING OF HIDDEN CHECK YSTEM MODULES LAYOUT INFORMATION UNDER THE PROTECTIVE LAYER LOGIN PASS Protective...
-
Page 41: Emergency Disarming
Emergency disarming Not paying attention to the siren signals, make sure that the ignition is o and enter the «Secret PIN- code» (see the procedure description above). If there are no siren sounds or LED ashes, check the battery. It is not possible to enter the «Secret PIN-code», if there is no power supply. •... - Page 42 2. Code Immobiliser nter the programming 2. Immobiliser / Anti-hi-Jack – enter the level 13 - press the VALET button 13 times programming level 15 - press the VALET button (without pauses). 15 times (without pauses). 3. o deactivate the function –...
-
Page 43: Programming The System
PROGRAMMING THE SYSTEM System settings and parameters can be con gured using the Pandora Alarm Studio and Pandora Specialist application. Some functions can be con gured only by the programming menu of the system. It is required to put the system to programming mode to get access to the settings. -
Page 44: Pandora Specialist Application
• Connect the system to the PC via a USB cable; • Put the system to the programming mode; • The Pandora Alarm Studio will automatically connect to the system and you will be able to con gure settings and update rmware. -
Page 45: Updating Rmware
It is recommended to update rmware of the base unit before installing and programming the system. Pandora Specialist Pandora Alarm Studio • Open the «Check rmware» menu and select • Open the «Update Software» window and one of the update options («Download select one of the update options («Load from... -
Page 46: Programming Table
10.6 – Pairing an additional device RHM-03BT / PS-331BT / PS-332BT H1 P6 10.7 – Pairing an additional device H1 P7 10.8 – Pairing a telemetry module Pandora Eye Pro / NAV-X H1 P8 10.9 – Pairing a GPS-receiver NAV-035 BT H1 P9 10.11 –... - Page 47 Level 0 – Entering a level Enter programming mode, enter the «Service PIN-code» (default value is 1-1-1-1) using an external VALET button or the VALET button located on the base unit. After entering programming mode, the system waits for level input – «Level 0 Entering a level». Enter a desired level using the VALET button (see the programming table) to change settings or parameters: •...
- Page 48 Level 4 – Reset to the factory settings The procedure recovers the factory settings of the system without deleting previously registered devices (tags, mobile device, relays, etc.) that is stored in the non-volatile memory. Enter the programming level • Press and hold the VALET button for more than 4 seconds. Release the button after a sound of the Siren.
- Page 49 The LED will light red after entering. Press and hold the VALET button for 5 seconds until 6 orange ashes of LED indicator or 5 sound signals of the Siren. Open the Pandora Specialist or Pandora BT app, go to «Search device» screen and select the device and then select one of the update options: •...
- Page 50 The level is divided into 3 sublevels Selecting buttons The system will automatically enter the sublevel 11.0 (Selecting buttons) after entering the level 11. The system will wait for buttons pressing. Each pressing will be con rmed with an orange ash of the LED.
-
Page 51: Additional Devices
ADDITIONAL DEVICES Remote control D-035 – is a two-way short-distance communication device designed to control a security system and receive information about its state. The remote control can be used as an owner authorization device. CONTROL COMMANDS Arming/Disarming | Service mode STATUSES Vehicle and system statuses OWNER AUTHORIZATION... -
Page 52: Warranty Obligations
WARRANTY OBLIGATIONS Manufacturer guarantees correct operation of the service-security system if exploitation, installation, storage and transportation conditions described in this manual were met. The system should only be used according to installation scheme and user manuals. The system is meant to be installed by the professional car electronics installers. The installer should ll in installation certi cate that is included in this manual. - Page 53 U S E R A N D I N S TA L L AT I O N M A N UA L...
- Page 54 PA N D O R A S M A R T M OTO P LU S...
-
Page 55: Installation Certi Cate
Car speci cations: Car model Type Id number (VIN) Registration number Security system speci cation: Model Pandora Smart Moto Plus Serial number Service center name, full address and installer’s stamp Signature_____________________/___________________________________/ Signatory Work accepted________________/___________________________________/ Signatory Date «____»___________________20____y. -
Page 56: Acceptance Certi Cate
Pandora Smart Moto Plus Model is in conformity with Electromagnetic Compatibility Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC. Serial number ______________________________ Date of production__________________________ Responsible person’s signature (stamp) Packager_____________________________________________________________________________ Signature (personal stamp) Warranty card Pandora Smart Moto Plus Model Serial number _________________________________________________________________________ Date of purchase «____»...
Need help?
Do you have a question about the Smart Moto and is the answer not in the manual?
Questions and answers