Table of Contents
Advertisement
CONTROL THE SYSTEM
Arming
To arm the system when the ignition is off, use one of the methods described below. The system
will confirm the command with
1х
short sound signal and
Clutch lever – Press the clutch lever when an owner authorization device (radio tag, phone, band,
watch) is in the coverage zone
.
Radio tag – A radio tag must be in the Bluetooth coverage area. Shortly press the control button
on the tag.
Mobile app Pandora Connect – When the system is online (Bluetooth connection), press and hold
the button
on the control panel until the scale is fully loaded. The icon of the current system mode
will be changed
.
HandsFree mode – Move with an authorization device away from your vehicle
VALET button – Press and hold the VALET button for 3 seconds. The system will be armed in 30
seconds. The LED indicator is lighting red during the countdown.
Disarming
To disarm the system, use one of the methods described below. The system will confirm the
command with 2 short sound signals
2х
24
1х
flash of light signalization .
1
HANDS FREE
MOBILE APP
.
and 2 flashes of turn indicators
2х
.
PA N D O R A M I N I M OTO
/1
Clutch lever – Press the clutch lever when an owner authorization device (radio tag, phone, band,
watch) is in the coverage zone
Radio tag – A radio tag must be in the Bluetooth coverage area. Shortly press the control button
on the tag.
/1
Mobile app Pandora Connect – When the system is online (Bluetooth connection), press and hold
the button
will be changed
HandsFree mode – Move toward the vehicle with an authorization device
VALET button – Enter the «Secret PIN-code» (see the «Emergency disarming using the VALET
button» section).
PANIC mode
If your vehicle or you are in danger and you want to draw attention to your vehicle, you can use
PANIC mode. In this mode the siren
30 seconds. To activate this mode, use one of the methods described below.
Mobile app Pandora Connect – When the system is online (Bluetooth connection), press and hold
the button
hold the button
!
T
O chaNgE ThE lOcaTiON Of ThE buTTONs ON ThE cONTrOl paNEl gO TO ThE app sETTiNgs aNd ENTEr ThE
b
»
uTTONs
mENu
U S E R A N D I N S TA L L AT I O N M A N UA L
HANDS FREE
MOBILE APP
.
on the control panel until the scale is fully loaded. The icon of the current system mode
.
will sound and turn signals
on the control panel until the scale is fully loaded. To switch this function off press and
on the control panel until the scale is fully loaded.
.
2
/2
/2
.
will flash repeatedly for
«c
ONTrOl
25
Advertisement
Table of Contents
