Husqvarna FC 450 2022 Owner's Manual page 52

10 TUNING THE CHASSIS
50
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamp.
–
1
Mount screws , but do not tighten yet.
–
First bolt the handlebar clamp with screws
longer, higher side of the handlebar supports so that both
parts touch.
–
1
Tighten screws evenly.
Guideline
Screw, handlebar
clamp
Finishing work
–
Mount the handlebar cushion.
1
onto the
M8 20 Nm (14.8 lbf ft)