Husqvarna FC 450 2022 Owner's Manual page 76

11 SERVICE WORK ON THE CHASSIS
74
–
Mount and tighten screws
Guideline
Screw, fuel tank
spoiler on radiator
K01085-11
–
Plug in connector
–
Remove the wash cap set. Clean the quick release cou-
pling thoroughly with compressed air.
Info
Under no circumstances should dirt enter into
the fuel line. Dirt in the fuel line clogs the injection
valve!
–
A01005-10 Spray silicone spray onto a lint-free cleaning cloth and
lightly lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
(FX 450)
–
Attach the fuel tank breather hose to the fuel tank lid.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
V01354-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
K01085-11
2
with the collar bushings.
M6 6 Nm (4.4 lbf ft)
3
for the fuel pump.
p. 146)
4
.
1
with the rubber bushing.
M6 10 Nm (7.4 lbf ft)
2
with the collar bushings.
M6 10 Nm (7.4 lbf ft)