Tank - Daikin Altherma EHYKOMB AA Series User Reference Manual

Using the instant DHW home page
To adjust the instant DHW temperature

4.5.3 Tank

Reheat mode
EHYHBH05AF + EHYHBH/X05+08AF + EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355632-1E – 2020.10
Not applicable for Switzerland
Depending on the user profile, the user interface gives you either a basic or a
detailed home page.
User profile = Basic
44°C
Desired temperature
1 Go to the instant DHW home page.
2 Press or to adjust the instant DHW temperature (DHW).
The instant DHW set point temperature may NOT be below 40°C.
The following modes are only applicable if a tank is installed and are set by the
installer.
To determine which DHW tank mode you are using (method 1)
Check the installer settings table filled in by the installer.
To determine which DHW tank mode you are using (method 2)
Prerequisite: User profile = Detailed.
1 Go to the DHW tank temperature home page (Tank).
2 Check which icons are displayed:
If... is displayed
In reheat mode ( ),the DHW tank continuously heats up to the temperature shown
on the DHW tank temperature home page (example: 50°C).
T t
60°C
50°C
40°C
15°C
00:00
T Domestic hot water tank temperature
t
t Time
Tue 01:03
DHW
Desired temperature
Then the DHW tank mode =...
Reheat mode
Scheduled mode
Scheduled + reheat mode
1 3
2 4
07:00 14:00 21:00
4 Operation
|
User profile = Detailed
Tue 01:03
44°C
DHW
t
User reference guide
27