Daikin Altherma EHYKOMB AA Series User Reference Manual page 21

To set the overrule period
EHYHBH05AF + EHYHBH/X05+08AF + EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355632-1E – 2020.10
Situation
18.0°C
Scheduled Scheduled
Mon 17:00 Mon
18.0°C
Scheduled Scheduled
Mon 17:00 Mon
20.0°C
Scheduled Scheduled
Mon 17:20 Mon
Prerequisite: You switched the permission level to Advanced end user.
1 Go to [7.2]: > User settings > Temperature lock.
2 Select a value and press
▪ Permanent
▪ hours (2, 4, 6, 8)
Usage example: You have a party
If you are in the following situation:
▪ You are using the following room temperature schedule:
- 17:00 preset value (Comfort) = 20°C
- 23:00 preset value (Eco) = 18°C
▪ Tonight you have a party and you want to use the preset value (Comfort) until
02:00.
Then you can do the following:
1 Set the overrule period (Temperature lock) to 6 hours.
2 At 20:00, go to the room temperature home page (Room).
3 Press to select .
Result: The preset value (Comfort) will be used until 02:00. After that, the
schedule will be used again.
Usage example: You go away for a couple of hours
If you are in the following situation:
19.0°C
You temporarily overrule the schedule.
Desired temperature = custom
temperature = 19°C.
17:00
At the next scheduled action (17:00),
the schedule will be used again.
20.0°C
You change the mode from scheduled
to preset value (Comfort
(heating)).
17:20
Desired temperature = preset value
(Comfort (heating)) = 20°C.
After 2 hours, the schedule will be used
again (17:20 => 20°C).
21.0°C
Before you have changed the mode
from scheduled to preset value, and
now you temporarily overrule the
17:20
preset value.
Desired temperature = custom
temperature = 21°C.
After 2 hours, the schedule will be used
again (17:20 => 20°C).
:
4 Operation
|
Description
User reference guide
21