IKEA EFTERSMAK Manual page 45

ENGLISH
Clock function
Use to set a countdown
time. This function has no
MINUTE
effect on the operation of
MINDER
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
00:00 If you do not set any oth-
COUNT UP er clock function the
TIMER COUNT UP TIMER auto-
matically monitor how
long the oven works.
The counting starts imme-
diately when the oven
starts to heat.
The Count Up Timer can-
not be used with the func-
tions: DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows
"12" flashes.
1. Turn the control knob to set the hours.
2. Press to confirm and set the minutes.
The display shows
"00" flashes.
3. Turn the control knob to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
and again until the indicator for the time of
day flashes in the display.
Application
and "12:00".
and the set hour.
again
Setting the DURATION function
1. Set a heating function. Press
confirm.
2. Press again and again until
starts to flash.
3. Turn the control knob to set the minutes
and press to confirm. Turn the control
knob to set the hours and press
confirm.
When the set Duration time ends the signal
sounds for 2 minutes.
flash in the display. The oven turns off
automatically.
4. Press any button to stop the signal.
5. Turn the knob for the heating functions
to the off position.
This function is not available for some oven
functions.
Setting the END function
1. Set a heating function. Press
confirm.
2. Press again and again until
to flash.
3. Turn the control knob to set the hours
and press to confirm. Turn the control
knob to set the minutes and press
confirm.
At the set End time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button to stop the signal.
5. Turn the knob for the heating functions
to the off position.
This function is not available for some oven
functions.
Setting the TIME DELAY function
1. Set a heating function. Press
confirm.
2. Press again and again until
starts to flash.
45
to
to
and time setting
to
starts
to
to