Maintenance Chart - Campbell Hausfeld PS240C Operating And Assembly Instructions Manual

Operating Instructions and Assembly Instructions
Airless Paint Sprayers
maintenance
Item Check
Before each use
Product safety
labels
Trigger adjustment Before each use
Before each use
Airless hose
Before each use
Sealing surfaces
Suction tube Before each use
Before each use
Bypass tube
Before each use
Suction filter
and every 5 gal.
Gun filter Before each use
Before each use
Roller nap
Before each use
Prime/spray valve
Before each use
Push button
Block bolts Before each use
Pressure valve
Inlet valve
Outlet valve
Before each use
Spray tip
Diaphragm
assembly
Oil
Block
Before each use
Hose connector
* Service Center Recommended
www.chpower.com

maintenance Chart

User
replace Serviceable? Detail Notes
Yes
As required
Yes
Yes
Yes
As required Yes
Yes
As required
Yes
Every 25 gal. or
more often if
required
Every 25 gal. Yes
Yes
As required
Yes
Every 1000 gal.
Yes
Every 1000 gal.
Do not require Yes
replacement
with normal use
*SCR
Does not require
replacement
with normal use
Every 250 gal. Yes
Yes
Every 250 gal.
Yes
Every 20-75 gal.
*SCR
Every 1000 gal.
Yes
Every 2000 gal.
Yes
Does not require
replacement
with normal use
Yes
When stripped
or leaking under
pressure
16
See parts listing for location of product safety
labels and related part numbers.
See trigger lock warning under Spray Gun
Maintenance.
Read information on the hang tag attached to the
high pressure hose for instructions on maintenance.
Make sure they are clean.
Check for nicks and cuts.
Check for nicks and cuts.
Do not attempt to clean gun filter, only replace.
3/4" Wrench, torque to 80 in/lbs.
7/8" Socket or wrench, torque to 200 in/lbs.
Block bolts are to be torqued to 275 in/lbs. in an
"X" pattern. These bolts should be checked peri-
odically for correct torque. 1/4" Hex.
5/8" Wrench, torque to 75 in/lbs.
1-1/16" Wrench, torque to 150 in/lbs.
3/4" Wrench torque to 150 in./lbs.
1" Wrench torque to 135 in/lbs.
This part is only worn out if broken or torn.
H-32 Hydraulic oil CH #AL170200AV.
5/8" - Torque to 350 in/lbs.