GE Profile PB965 Owner's Manual page 29

Troubleshooting Tips ... Before you call for service
Problem
Oven will not stay set.
Water remaining on oven
floor after Steam Clean cycle
Oven will not work remotely
49-2000875 Rev. 0
Possible Cause
Function error.
This is normal.
Router issues, no wireless signal, etc.
Oven is not connected.
Remote enable is off
What To Do
Disconnect all power for at least 30 seconds and then reconnect
power. If repeating, call for service.
Remove any remaining water with a dry cloth or sponge.
For assistance with oven wireless network connectivity, please
call 1-800-220-6899.
Turn remote enable on (see Special Features section of this
manual)
29