Klarstein GRANDBREEZE ECO Manual page 46

EN
46
FAN mode
Note: If the device is only used in this mode, the exhaust hose does not need to be
connected.
Press the MODE button repeatedly until the FAN indicator lights up. Then press the FAN
SPEED button several times to select one of three speed levels High > Medium > Low.
The display shows the selected speed in the form of bars:
High Medium
DRY mode
This mode is ideal for reducing the humidity in the room. In dry mode, the device should
be installed in the same way as in cooling mode. For this purpose, the exhaust air hose
must be connected so that the moisture can be discharged to the outside. Press the
MODE button several times until the DRY indicator lights up. The display shows [dh].
Note: In this mode, the fan speed is regulated automatically and cannot be adjusted
manually.
SMART mode
The device automatically selects whether to operate in cooling mode, heating mode or
fan mode. To activate the mode, press the MODE button repeatedly until the following
indicator lights up on the display:
Then press the FAN SPEED button repeatedly to select one of the four speed levels High
> Medium > Low > Auto.
Low