Download Print this page

Charging Steps; Charging Time; Error Light - BorMann Technik BBC2000 Owner's Manual

Advertisement

Available languages

Available languages

CHARGING STEPS

STEP 1: DIAGNOSIS (Check if battery has connected with the charger and also check battery voltage)
STEP 2: DESULPHATION (If battery voltage is too low, programs automatically generate pulsing current to remove sulphate)
STEP 3: ANALYSE (Check if the battery voltage reaches to the threshold after desulphation, and charging begins if the battery
voltage is OK)
STEP 4: SOFT START (Charge with echelon constant current)
STEP 5: BULK (Charge with constant maximum current until battery voltage is reached to the threshold)
STEP 6: ABSORPTION (Provide gradually declining current charge for maximum battery voltage)
STEP 7: ANALYSE (Test if the battery can hold charge)
STEP 8: MAINTENANCE (Continuously monitor the battery, and charging current will intelligently adapt to the variable
battery voltage)
NOTICE: After full charging cycle, use this battery to start matched vehicle's engine. If engine cannot be activated (exclude
the problem of vehicle itself), it indicates this battery has declined storage capacity and need to be replaced.

CHARGING TIME

Different battery capacity, residual voltage and charging current would affect the charging time. Following data is only for
reference (under the condition of fully discharging).
Approx. Time to Charge in Hours
Battery Size /Ah
2A
4
2
14
7
25
12.5
30
15
40
20
50
25
60
30
100
----------
120
----------
180
----------
230
----------
300
----------

ERROR LIGHT

When ERROR light is on, it means the charger detects invisible fault. Therefore, the user should solve the fault before use. If
the user could not solve problems, please consult the professional person.
The reasons may include the followings:
1) The battery voltage is rather low.
2) Reverse connection.
3) Overload.
4) When with buzzer sound, it indicates the temperature inside charger is too high. After the internal temperature reduces,
the charger will automatically start charging again.
5
6A
10A
----------
----------
2.3
----------
4.2
2.5
5
3
6.7
4
8.3
5
10
6
16.7
10
20
12
30
18
38.3
23
----------
30
www.BormannTools.com
15A
----------
----------
----------
2
2.7
3.4
4
6.7
8
12
15.3
20

Advertisement

loading

This manual is also suitable for:

018254Bbc2000