Cable - GL-INET Velica User Manual

2.1) Cable

Connect the router to the modem or main router via Ethernet cable to
access the Internet.
Before plugging the Ethernet cable into the WAN port of the router, you can
click to set the WAN port as a LAN port. That is useful when
Use as LAN
you are using the router as a repeater. As a result, you can have one more
LAN port.
Plug the Ethernet cable into the WAN port of the router. The information of
your connection will be shown on the Cable section. DHCP is the default
protocol. You can click to change the protocol.
Modify
Page 3 | 147