GL-INET Velica User Manual page 116

Model Tor firmware path
GL.iNet6416 https://dl.gl-inet.com/firmware/6416/tor/
AR150 https://dl.gl-inet.com/firmware/ar150/tor/
AR300M https://dl.gl-
inet.com/firmware/ar300m/nand/tor/
AR300M- https://dl.gl-
Nor inet.com/firmware/ar300m/tor/
MT300N https://dl.gl-
inet.com/firmware/mt300n/tor/
MT300A https://dl.gl-
inet.com/firmware/mt300a/tor/
GL-MiFi https://dl.gl-inet.com/firmware/ar150/tor/
GL-AR300 https://dl.gl-inet.com/firmware/ar300/tor/
GL-MT750 Not supported yet
AR750 Not supported yet
Using the firmware UI
After you flash the firmware to your device, when it reboots you need to set up
the device at
http://192.168.8.1
you need to connect via WiFi, the default wifi password is
If
!!! NOTE
You need to move the hardware switch to the right side if you want to access
the UI. Otherwise you are connecting to the Tor network and will not be able to
access the UI. This is for security reasons.
First time setup
The first time you acess the setting UI, you will be asked to setup a new
password immediatelly. Just choose a password and your TimeZone and submit.
The device will reboot in firmware 1.4.
NOT
.
Newest Note
Version
1.3
2.264
2.264 .rar is for web upgrade .img
is for uboot upgrade
2.264
2.264
2.264
1.3 MiFi don't have a Tor
firmware itself. Use AR150
1.3 instead
1.3
.
goodlife
Page 111 | 147