Debrick Via Uboot - GL-INET Velica User Manual

Reset
Press and hold for 10 seconds then release to reset the router to factory
settings. All user data will be cleared.

11.3 Debrick via Uboot

Using Uboot to Debrick Your Router
You may have bricked your router if you were doing some DIY projects or flashed
a wrong firmware. You may not be able to access your router but you can re-
install the firmware by using Uboot failsafe.
Please follow the procedures below to access the Uboot Web UI and re-install the
firmware.
You can also refer to our video,
FailSafe.
1. First you have to download firmware to your computer. You can download
the firmware here. For GL-AR300M, GL-AR300M-Ext, GL-AR750S-Ext, please
download the .img firmware file. For GL-B1300, GL-S1300, GL-B2200 please
download the .img firmware. Everyone else, download the .bin firmware file.
2. Connect your computer to the Ethernet port (either LAN or WAN) of the
router. You MUST leave the other port unconnected.
3. Press and hold the Reset button firmly first, and then power on your device.
(If your device does not have a power button, plugging it in will power it on
automatically.)
If you can not find the reset button, please refer to our page,
and Reset.
Release your finger when you see the LED has flashed:
4. The Power LED will light up. Then, other LEDs will start flashing.
5.
6 times for GL-MiFi, and then the LTE light will faintly flash twice.
•
5 times for GL-AR150, GL-AR300M, GL-USB150, GL-AR750, GL-AR750S-
•
Ext (Slate), GL-X750-Ext (Spitz), GL-MT300N-V2, GL-E750 (Mudi).
4 times for GL-S1300, GL-B1300.
•
How to Recover GL.iNet Mini Router by U-Boot
How to Repair
Page 131 | 147