8.2.3.
WireGuard Server
You can set up a WireGuard server on GL.iNet router with firmware 3.0. Click
.
Create a New User
(1) Start a WireGuard server
You can simply use the default parameters of Local IP and Local Port, or you can
set your own value. Then click
(2) Add a new client
You have to add a new user and apply the configurations when you are
connecting to this WireGuard server.
Click
tab and then
Management
to start your own WireGuard server.
Start
.
Create a New User
+
Page 28 | 147